has anyone done a dual t case set up in there track/kick??? if so how did u do it and can i see some pics....

You asking about any dual tcase setup, or one in particular (like trackick/trackick, trackick/samurai, etc.)?  I know a few have done the trackick/samurai setup, but I don't know if anyone on here has that setup.

yeah i was wondering about trackick to any divorced t case such as the samurai t case. i was also wondering about drive shaft angles and how the divorced case was held up in the frame.

yeah i was wondering about trackick to any divorced t case such as the samurai t case. i was also wondering about drive shaft angles and how the divorced case was held up in the frame.

While I have never done dual tcases in a trackick...
I would think the rear dshaft angle might be kinda steep on a 2 door.
You would have to make new frame mounts to hold the new tcase, of course.

Check out the Kicker series from OTT Industries.  There is also the Shogun, by Rock 4X Fabrication, that allows you to combine your Tracker T-Case with a Samurai T-Case similar to the Kicker 3.

http://www.ottindustries.com/kicker3.htm

thanks for the help guys. i think if im gunna be doing this im gunna do my own thing not buy it. i saw this one picture online somewhere where the guy cut up the kick t-case removing the front output and made a plate to covor it. then he made a frame from t-case to t-case so the rear transfer case (samurai) was held up. seems to be not that tricky?? i just wonder how hard it would be to make the covor to covor where you cut...... hope this makes sence. here's a pic.

i am doing this mod this winter when i put in my 1.6 and im building it not buying

Do you know how you will be doing it???

Here is my DIY build that I did for a "kicker 3", "shogun", doubler, whatever you want to call it.

http://bbs.zuwharrie.com/content/topic,46349.0.html