Hello Guest

weber 40DCOE conversion

  • 37 Replies
  • 6475 Views

0 Members and 6 Guests are viewing this topic.

*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: weber 40DCOE conversion
« Reply #30 on: June 07, 2011, 10:15:35 PM »
or run propane then have a Barbee afterwards.
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.

*

Offline kreator

  • 634
  • 15
  • Gender: Male
Re: weber 40DCOE conversion
« Reply #31 on: June 08, 2011, 08:33:18 AM »
WE USE DUAL CARBS ALL THE TIME OFF ROADING, YOU CAN GET THE CARB HATS FOR REMOTE AIR FILTERS AT CB PERFOMANCE, THEY ALSO STOCK ALL THE JET SIZES FOR RE JETTING. I WOULD NOT GO TO 45s UNLESS YOU ONLY USE ONE CARB , YES ONE CARB IS EASYER TO TUNE. THERE ARE ALSO DELORTO CARBS THAT ARE EASYER TO TUNE BUT YOU WILL PAY MORE MONEY FOR THEM . MY OPPION WOULD BE A SINGLE CARB EATHER WAY.HAVE YOU BOUGHT CARBS YET ?
I HAVE A 4O WEBAR AND A 40 DEL FOR SALE AND WOULD HELP YOU GET IT SET UP . :)
« Last Edit: June 08, 2011, 06:28:45 PM by kreator »
BOB | www.KreationFab.com | 503-689-1377

Re: weber 40DCOE conversion
« Reply #32 on: June 13, 2011, 08:50:03 PM »
thaks for reply guys.
Kreator. yeah i can think about the carbs but i need to find a intake manifold. EBEWLEY told that suzuki hawk sell some. but they never replied my answer. i tried another website in belgium (i guess) but no reply again.

so this is the question guys. i ll purchase twin weber 40 DCOE. where i can find a intake manifold ???

*

Offline kreator

  • 634
  • 15
  • Gender: Male
Re: weber 40DCOE conversion
« Reply #33 on: June 14, 2011, 09:00:34 AM »
All else you fab the manifold and have the flanges machined, if you need help with that I can fab one up for you.  :)
BOB | www.KreationFab.com | 503-689-1377

Re: weber 40DCOE conversion
« Reply #34 on: June 15, 2011, 06:32:03 PM »
would be great... but im in cyprus. its hard to got it shipped... and also need some rubber parts etc... so org park will be better ;) but why not ;)

*

Offline ebewley

  • 6548
  • 64
  • Gender: Male
  • ZUKIWORLD Online, Editor
    • ZUKIWORLD online
Re: weber 40DCOE conversion
« Reply #35 on: June 15, 2011, 07:19:58 PM »
thaks for reply guys.
Kreator. yeah i can think about the carbs but i need to find a intake manifold. EBEWLEY told that suzuki hawk sell some. but they never replied my answer. i tried another website in belgium (i guess) but no reply again.

so this is the question guys. i ll purchase twin weber 40 DCOE. where i can find a intake manifold ???

CALL Hawk Suzuki. Email is not going to work that well if at all.

-Eric
Eric L. Bewley                               
Editor, ZUKIWORLD Online                   

Suzuki 4x4 Owners Association - Please Join  The ZUKIWORLD ORDER Today!
About ZUKIWORLD Online: We are an enthusiast web site dedicated to the promotion of the Suzuki Automobile as the best and most capable vehicle on the planet. We offer product reviews, Tech tips, DIY, Travel and Adventure, Forum, Technical information, Life Style, and so much more!

Re: weber 40DCOE conversion
« Reply #36 on: June 20, 2011, 06:56:56 PM »
thanks for reply guys. specially EBEWLEY.
i talked with my mechanic and he tol me that my ignition is electrical.

therefore how i will sort out vacuum problem. (Eric told me that i need to fit mechanic advance on distributor however i do not know how to do it.

can i sort out vacuum problem with fuel regulator ??

can you help me :( ??

*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: weber 40DCOE conversion
« Reply #37 on: June 21, 2011, 10:35:54 PM »
Keep your electronic ignition, it will work fine with the carburetor
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.