Hello Guest
« previous next »
Pages: [1]   Go Down

EGR CODE

  • 6 Replies
  • 2172 Views

0 Members and 1 Guest are viewing this topic.

*

Offline SIDEKICK65

  • 176
  • 0
  • Gender: Male
EGR CODE
« on: March 15, 2012, 11:41:11 AM »
ON MY 98 SIDEKICK I KEEP GETTING AN EGR CODE.WHILE THE ENGINE IS RUNNING I CAN OPEN THE EGR AND IT RUNS LIKE CRAP SO I NO IT'S WORKING.ANY ONE HAVE ANY IDEA'S   ???
Logged
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: EGR CODE
« Reply #1 on: March 15, 2012, 02:26:46 PM »
I guess that would imply that its not opening; have you checked the vacuum lines and tested the VSV?
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline ranger88den

  • 279
  • 12
Re: EGR CODE
« Reply #2 on: March 15, 2012, 02:42:55 PM »
If you have the 1.6, 16v, then you have the EGR tube, which often gets clogged as well as the exhaust manifold passage.  All components need to be operable in the system.  With the EGR valve removed, blow compressed air into each opening (intake and exhaust), if it backfeeds from either, you have restriction.  Good luck
Logged
*

Offline SIDEKICK65

  • 176
  • 0
  • Gender: Male
Re: EGR CODE
« Reply #3 on: March 15, 2012, 05:28:30 PM »
ranger..are you talking about the silver metal line from the egr that bolts to the back of the in tank? just make sure that line isn't plugged.
Logged
*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: EGR CODE
« Reply #4 on: March 15, 2012, 06:40:56 PM »
If it is a 16-valve, there is a passage cast into the side of the head as rhinoman mentioned. 

This passage connects to the intake side of the head and can get blocked by carbon. 

I am not absolutely sure, but there may be something similar on the 8-valve head. 

Your EGR will not work well if this passage is blocked.   
Logged
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com
*

Offline ranger88den

  • 279
  • 12
Re: EGR CODE
« Reply #5 on: March 16, 2012, 06:02:18 AM »
Quote from: SIDEKICK65 on March 15, 2012, 05:28:30 PM
ranger..are you talking about the silver metal line from the egr that bolts to the back of the in tank? just make sure that line isn't plugged.
Yes, it's stainless steel.  Make sure it's clean as well as the intake opening.  There's also a passage within the exhaust manifold casting that gets clogged.
Logged
*

Offline gearjam

  • 97
  • 1
  • Gender: Male
  • RC 2010
Re: EGR CODE
« Reply #6 on: March 20, 2012, 04:46:00 PM »
Logged
Pages: [1]   Go Up
« previous next »