Hello Guest
« previous next »
Pages: [1]   Go Down

Deceleration Mixture Control Valve

  • 3 Replies
  • 1898 Views

0 Members and 2 Guests are viewing this topic.

*

Offline jga154

  • 28
  • 0
    • Jim Arnold Blog
Deceleration Mixture Control Valve
« on: May 03, 2011, 08:10:54 AM »
86 Samurai, 1.3L stock, Cali legal

I just discovered this control valve has a hole worn through the aluminum cap caused by the steel clip that holds the assembly. None of the local parts stores can locate it from their suppliers. I tried online to no avail. Photo included.

Any ideas on where to find something like this?

I have it patched right now an it works but would like to replace it. Thanks.
« Last Edit: May 03, 2011, 12:51:12 PM by jga154 »
Logged
86 Samurai Tin top, OME Springs, Bonz shackles, 30x9.50, 4.9:1 TC, rear Lockright locker, Rocky Road Outfitters DIY front bumper
*

Offline rascott

  • 669
  • 15
  • Gender: Male
  • tread lightly monkeywrench a little
Re: Deceleration Mixture Control Valve
« Reply #1 on: May 03, 2011, 01:10:26 PM »
that work the egr valve? looks different than mine.
mabe try hawk- they should be able to get you one.
Logged
'89 kick w/little motor, still got pieces of jeff's pucks, stan's sticks into 4.24:1 tcase, 31x10.5x15's, rear lockrite, kick power steering, some radios(kj6esv), bmw seat, other changes just because. done on the cheap.
suzi the psychic gets me fishing.
*

Offline jga154

  • 28
  • 0
    • Jim Arnold Blog
Re: Deceleration Mixture Control Valve
« Reply #2 on: May 03, 2011, 01:53:42 PM »
Not part of the EGR. It is called the Deceleration Mixture Control Valve System in the service manual. Supposed to save fuel when you decelerate. I know it won't idle with a hole in the top. Found it for $93.42 at a dealer, ordered it from Hawk used for $25.00.

Thanks.
Logged
86 Samurai Tin top, OME Springs, Bonz shackles, 30x9.50, 4.9:1 TC, rear Lockright locker, Rocky Road Outfitters DIY front bumper
*

Offline lv2fsh

  • 312
  • 19
Re: Deceleration Mixture Control Valve
« Reply #3 on: May 03, 2011, 09:40:27 PM »
Had to change mine a wile back. was keeping it from passing smog. Had that same hole.
Logged
Pages: [1]   Go Up
« previous next »