Okay guys just recieved my new input shaft and my new syncronizer gear although I have one problem. Where do i get the bearing that goes on the input shaft. I am not talking about a throw out bearing. I am talking about the bearing that all the gears ride one the input shaft goes through it. I need some info on where to get one

A bearing supply store should be able to get you that bearing. 

If you don't have a bearing supply store near you, measure the outside diameter, the inside diameter and thickness, then hop on line and do some searches. 

You could also try Cobratransmission.com on the internet.  They carry a lot of the 5 speed parts and kits for rebuilding Sammy, Kick Tracker 5-speed trannys.

Like this one:

https://cobratransmission.com/suzuki-samurai-5-speed-input-bearing-50044019-1?zenid=14bfc7bcb46f550b5c4c4b00ebaef13d

This is their Sammy tranny page.

https://cobratransmission.com/index.php?main_page=index&cPath=2_1834&zenid=14bfc7bcb46f550b5c4c4b00ebaef13d

Man that is some B.S I have looked for a solid two days for that bearing online. Ive even looked at cobra transmissions. I love this thread I am new to samurais and everyone on here has been nothing but excellent help so big thank you