Who has made their own hinge mechanism for the soft top?  All the kits I have found to buy have the plastic pieces and I'd like to make an all aluminum one or stainless.  Can anyone provide the dimensions of these parts?  My Zuk came without a top or parts so I'm going completely blind here...

Thanks.

C

ill check this tomorrow, and if no one has give you the dems. ill get em for you. its dark now, or id do it.

I didn't think monsters were afraid of the dark?   

here is a basic drawing of the hinge if it helps to mark down the dimensions...

Mainly what I need is the distance between the holes on the hinge part, and the distance between the front mounting hole and the front hinge point on the base part.

Looks like your last reply is a few dayz ago... I'll check in the morning when I have my Zuk in the shop. If you don't have a reply I will give ya one.

                                                                              Tux...

4.5 from horizontal eye to eye on the bow lift bracket and 1' from the vertical mount down bracket to the horizontal side to side mount for the bow lift bracket.

So if I'm following you correctly, do you mean something like this?

Also, what is this track for?  Does something from the soft top fit into this rail?

Yes, your dimensions are correct to the drawing. The targa rail is for an old BesTop 2 piece top... Sorry for the length of time between answers.

If you need anything else just shoot me a PM...