What's the backspacing on stock 86 samurai wheels?

Anyone know?

there going to be close to 3.5 inch, it's snowing outside and my stock rims are buried in the Barn some place but if you need me to go out there let me know. there the stock white spokes off of a 1988.

A 86 white spoke wheel it's 4 inches backspacing.

there going to be close to 3.5 inch, it's snowing outside and my stock rims are buried in the Barn some place but if you need me to go out there let me know. there the stock white spokes off of a 1988.

If your out in the barn sometime maybe you can take a look, no big deal.

I checked today it is 3.5 inches to the inside of the bead area and 3.75 inches to the out side lip where the weights go.

Thanks. So if I wanted to run a larger tire like 235 75 15 or larger I would want to find a wheel with less than 3.5" bs. I was looking at some 15x7 wheels to use with 235's but the bs choices are 3.75" and 2.5", 2.5" might look goofy without much lift ?

remember though for every inch that you go up in lift you are supposed to go one inch wider for stability. when it comes to safety I would go with the 2.5, I have three sets of them, I like them.

For 235/75R15 I would just throw them on the stock wheels.  Work fine, no lift required as long as you trim the front bumper a bit.