Hello Guest
« previous next »
Pages: [1]   Go Down

Spare Tire Lift Bracket

  • 8 Replies
  • 1426 Views

0 Members and 4 Guests are viewing this topic.

*

Offline Emmission

  • 11
  • 0
  • Gender: Male
Spare Tire Lift Bracket
« on: February 10, 2009, 06:45:12 PM »
If you have a 1999 - 2004 GV or Tracker, have you been able to mount a 31" tire on the spare tire carrier, or does it rub against the bumper. I saw this guys product on ebay that seems to cure the problem. The question is, is it a problem?

Logged
*

Offline 2K1USGV

  • 218
  • 0
  • I Love ZUKIWORLD!
Re: Spare Tire Lift Bracket
« Reply #1 on: February 10, 2009, 08:40:25 PM »
Is it absolutely necessary? No. Will your 31" rub the bumper without it? Yes. It will push the plastic bumper cover down a bit. Also depends if it's a true 31" tire or a 30.5" tire.
Logged
*

Offline JayInBarrie

  • 107
  • 0
  • Gender: Male
Re: Spare Tire Lift Bracket
« Reply #2 on: February 11, 2009, 06:22:28 PM »
Take the plastic off the rear bumper.  The metal looks ok, just paint it black.
Logged
99 2dr Tracker, 33" tires stuffed in, home made roof rack.
*

Offline sir lance

  • 342
  • 4
  • I love my XL-7
Re: Spare Tire Lift Bracket
« Reply #3 on: February 11, 2009, 08:31:30 PM »
the 245 mtr's i ran on my GV JUST fit over the bumper, again it depends on what the tire actually measurs out to
Logged
02' XL-7 1 Ton axles, dual t-cases 37's etc......
Trucks are built not bought*********
*

Offline Yankee-Tim

  • 562
  • 1
Re: Spare Tire Lift Bracket
« Reply #4 on: February 12, 2009, 10:29:17 AM »
On my 31"s, I just drilled new upper holes and used a carbide rotaty bit to hog out the lower mount holes, and lifted the mount and bolted it back down.  Even carrying the tire AND a full Gerry can, it never moved.

Cost?  Free
Logged
*

Offline jeff1997

  • 1228
  • 27
  • Gender: Male
  • Suzuki: A Jeep thing only cheaper!!!!
Re: Spare Tire Lift Bracket
« Reply #5 on: February 12, 2009, 10:41:10 AM »
I cut the mount down the middle and welded it together offset. It was nessesary to clear my 31's
Logged
1997 4dr. Sidekick Sport 1.8L DOHC
2" coil spacers- I make and sell 1.5" and 2" on e-bay.  Look under seller: hoepkers
3" Masterkit1 body lift
Custom strut spacers
31/11.50/16 Super Swamper LTB's w/1.5" wheel spacers Steel bumpers Custom cold air intake 2" exhaust w/cherry bomb 98 Expedition, 2" lift, 35's, Magnaflow exhaust - BIG BLUE
*

Offline bzzr2

  • 1011
  • 3
Re: Spare Tire Lift Bracket
« Reply #6 on: February 12, 2009, 11:28:25 AM »
drop the bumper covers.. if you're wheeling for real (not just driving down dirt roads..) the plastic will eventually just get torn off anway.  i've even torn the whole steel bumper off hooking it on a massive hidden stump in a swamp.. more gas was bad that day!
Logged
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4
*

Offline sir lance

  • 342
  • 4
  • I love my XL-7
Re: Spare Tire Lift Bracket
« Reply #7 on: February 12, 2009, 11:30:27 AM »
^^^ i did that once as well on my sidekick, only i hooked it on a tree and tore it clean off hahahaha
Logged
02' XL-7 1 Ton axles, dual t-cases 37's etc......
Trucks are built not bought*********
*

Offline toofaroffroad

  • 226
  • 2
  • I Love ZUKIWORLD!
Re: Spare Tire Lift Bracket
« Reply #8 on: February 13, 2009, 09:13:30 PM »
I run a 31 inch spare and it's fits fine. I put a 1/4 wheel spacer to push it back a bit but honestly I don't think that is necessary. That is on the stock spare rim.
99 tracker
« Last Edit: February 14, 2009, 09:23:56 AM by toofaroffroad »
Logged
Pages: [1]   Go Up
« previous next »