Hello Guest
« previous next »
Pages: [1]   Go Down

CV

  • 2 Replies
  • 1091 Views

0 Members and 5 Guests are viewing this topic.

*

adamp209

CV
« on: July 10, 2007, 08:19:48 PM »
i need some new CV half shaft for my 03 chevy tracker zr2 well i work at autozone and i can get some for the tracker but what one can i get that are better and will fit without alot of work thanks adam
Logged
*

Offline bzzr2

  • 1011
  • 3
Re: CV
« Reply #1 on: July 11, 2007, 09:30:45 AM »
on the pass side???  just curious.  i'd say junk yard part on a non lifted vit or tracker that has rear end damage if that's an option.   
Logged
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4
*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: CV
« Reply #2 on: July 11, 2007, 10:08:58 AM »
Quote from: adamp209 on July 10, 2007, 08:19:48 PM
i need some new CV half shaft for my 03 chevy tracker zr2 well i work at autozone and i can get some for the tracker but what one can i get that are better and will fit without alot of work thanks adam

Unless the CV joints themselves are damaged, you can clean and reboot them for less than 20 bucks with a boot kit.

I would imagine that the AutoZone parts computer should give you all the manufacturers for that year's CV shafts. 

I don't think that there is anything that crosses directly and replacing them with 'yota CVs will probably require a bit of fabbing.  Try a search here for toyota cv or similar word combinations.  This forum is a great place for info like that.
Logged
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com
Pages: [1]   Go Up
« previous next »