Hello Guest
« previous next »
Pages: [1]   Go Down

high oil pressure

  • 3 Replies
  • 1092 Views

0 Members and 4 Guests are viewing this topic.

*

zooking

high oil pressure
« on: December 16, 2007, 10:15:52 PM »
hi guys,
my v-6 2.5 is running oil pressure of 80 to 90 psi and thats at idle!!
i feel its too high,,am i right  and i there a common cause in our engines??
cheers todd
Logged
*

Offline Arkainzeye

  • 5
  • 0
Re: high oil pressure
« Reply #1 on: December 24, 2007, 05:05:15 PM »
First thing i thought of is restrictive /Defective oil filter. I personaly have had more than 5 defective oil filters in the past 5 years. most were motorcycle, but 2 were automotive... I would change the oil filter asap, just to be sure. I had a oil filter colaspe Inside before.....
Logged
*

Offline IanL

  • 466
  • 5
  • Gender: Male
  • You know the answer - DIY :-)
Re: high oil pressure
« Reply #2 on: December 25, 2007, 01:04:12 AM »
Buy the manufacturer's oil filter.  Cheap filters are, well, cheap.
Logged
'98 GV V6, '96 X-90 with RRO 2.5" lift and 195/80 R15, '93 Cappuccino.
*

Offline JDMCRX

  • 1110
  • 0
  • Gender: Male
  • 02 Grand Vitra Pimp lol
Re: high oil pressure
« Reply #3 on: December 27, 2007, 07:04:41 AM »
Buy a OEM or WIX or K&N Thats way to high of a oil pressure idle should be 12-20 i think im not sure. If thats the base 1 filter may be plugged up or a passage 2 your pressure relief valve is gummed up in the oil pump.Change the filter and oil and report back to us.

Josh
Logged
01 GRAND VITARA

JBAUTO LONGTUBE HEADERS AND 2.5" JBAUTO EXHAUST

New project H27 in the GV goal 200 Wheel Horse Power  JPB 1.75"front 2" rear Grand Vitra lifts  www.jbauto.ca[/url]
Pages: [1]   Go Up
« previous next »