Hi,
I was thinking about JDMCRX's kit, using his spacers on top of my current +1.5" springs. But I would probably need to drop my front diff to avoid problems. Now I would be very happy if JDMCRX included it in his kit . But I understand maybe it is difficult for him to make this. So what comes into mind is, would diff drop brackets from a Sidekick work?
I can probably get them from 4x4Art as spares, and they are priced ok (18€ each bracket -> 54€). So if they worked I'd probably get JDMCRX's whole kit ...

By the way, here are some pics of the brackets and the list name:
AXLE DROP LINK CENTER

AXLE DROP LINK RIGHT

AXLE DROP LINK LEFT


It's designed to work on a 3" kit for a Sidekick. I hope it works!

bummer I can't get those over here. Those would be nice for a home grown lift.

No one knows if a track/kick diff drop brackets will work on a GV?

Heres what I know.
No
Why you ask?
Cause the GV is wider that a Kick

The top brackets are off a stock Kick and the bottom ones are off a 99-01 GV
Facing the front and look towards the rear of Rig
Left one mounts to the diff side and the right one mounts to the right side of the axle

(Dang it! Uploader not working, had to use my Cardomain site :-/)
How do I know?
Well I had to buy the whole front axle off of a GV to get the steel diff so I installed the steel axle too

Come to think about it, Go ahead and buy them, If they don't work you can send them my way

Wow, no, they wont work
Thanks a lot anyway... I don't think I'll spend my money on something that won't work, but you can try to order from them if you want :
www.4xfourart.com
(I've been trying to go to their site but it seems to be down )

I knew i kept those old parts around for some reason.
Thanks but i can't read there site anyways :-/
"O"well, shipping probley would have sucked anyways

hello
wanted  to  know   whats  knew  with  those  turkish guys -  do  the  have  somthing   new   for   the  GV ?
 do  they  have    a  lift   for  us?
  they   dont  return  mail -but  i  geuss  they  still  fabricate !!!
 couse  looking  for  those  control arms  and diff bruckets  for  about 2.5"
 do  anyone have  other  idie?

here  is  a  link :
www.4xfourart.com

Calmani include the diff bracket in their kit so you could enquire if they sell them seperately.  I recall someone else sourced the diff bracket seperately but it was in a topic a while ago and maybe on a different forum but I think it was from somewhere in Japan.

Who is your spring lift by?  How's it going for you?

Anyway good luck and be sure to let us know what you find   

http://www.vttr.com.tw/e4X4.htm

 yes  i    saw   this  link  while  ago   and  even  the  prices  where  added  , but   i'm  looking  for  the  control arms  too .
calmini  wont  sell   the parts  seperatly,  and  another   thing is  that  the  new  price  is  995$ -  including  manual locking  hubs -  that  i  dont  neeeeeeed!!!

so .......
still  looking
now  about  springs :  im  fabricating   4  for  about 150$   
and  for the  strat  -  i'll  use  the  strut   extender

 

I got the front diff brackets from VTTR. I haven't tried them offroad but they fit perfectly and seem  better  (stronger) than stock.

I got the front diff brackets from VTTR. I haven't tried them offroad but they fit perfectly and seem  better  (stronger) than stock.

1)did  you   lift  your  car?- if  so  than  how?
2) for  how  much $$$ did  you   got  the  brackets(with  and  without  shiping) ?
3)what  about  the  wishbones    (control  arms)?


4)  thanks

sherifon
1) my car is lifted 4cm (1.6in) with longer springs. I might lift it a little more later on with spring spacers, but as always money is very short.
2) the brackets were $90 without shipping and $120 with shipping. But it cost me 93€, because the dollar isn't strong right now. But normal prices are $1=1€, so it was very cheap for me.
3) control arms are stock. And they shall be for a long time.
4) you're welcome!

hy   sergi
what  have  you   done  with  the  struts ?
did  you  get  the   one   for  the  rear   (in  the  pic )?
longer  springs  you  said   -  than    did  you      remember  the  sizez/[k]-
(i mean -how  thogh   is  the  spring?)
what  have  you  done  with     the  kamber .....
do  you  fill  any  kind  of  change  -now  with  the  brackets?

do  you   have  pics?


rear  bracket:[/img]