Hello Guest
« previous next »
Pages: 1 2 [3]   Go Down

26 spline front axle shafts

  • 33 Replies
  • 14920 Views

0 Members and 10 Guests are viewing this topic.

*

Offline lil_Truck

  • 1148
  • 0
  • Gender: Male
  • Eric Gardner
Re: 26 spline front axle shafts
« Reply #30 on: February 28, 2004, 12:59:15 PM »
The one I broke was green!  :P
Logged
e-mail: liltruck|removethispart|@comcast.net
96 Tracker
6" Calimini Lift with custom Frame
32 MTR's Warn 8000i
Front/Rear ARB's Many New Mods soon.
*

Offline idaholwb

  • 772
  • 2
  • Gender: Male
  • And that's the way the metal crumpled!
Re: 26 spline front axle shafts
« Reply #31 on: March 01, 2004, 04:36:46 PM »
 I'm gonna confirm the theory of the 89-95 trackicks are indeed 22 spline, 8 and 16 valve. The 96-98 fronts are all 26 spline. I've torn enough of these apart for use in sammys to know this.
Logged
97 Sport
265/70-16s
2" lift
2.0 swap
I know...Pretty boring... FOR NOW...
*

Offline Bobzooki

  • 1754
  • 2
  • Gender: Male
  • Web Wheeler
Re: 26 spline front axle shafts
« Reply #32 on: March 02, 2004, 12:30:55 AM »
Quote
I'm gonna confirm the theory of the 89-95 trackicks are indeed 22 spline, 8 and 16 valve. The 96-98 fronts are all 26 spline. I've torn enough of these apart for use in sammys to know this.


Yeah.  I have no idea where I came up with the 23 spline number instead of 22 for the 95 and earlier.  I just verified it on ARB's website (easy to find there).

Rears are all 26 spline (10 bolt or 12 bolt).

The 22 spline fronts are 0.94 inch shafts, and the 26 spline fronts and rears are all 1.08 inch shafts.

EDIT:  I got confused on the spline count of the smaller shafts, because I don't have any of them any more on my trail rig (of course, my daily driver still has stock 22 spline, 0.94" shafts).
« Last Edit: March 02, 2004, 12:35:06 AM by Bobzooki »
Logged
Bob

Tahoe 24' Fish-N-Fun Tritoon
115 HP Mercury outboard
*

GRVIT

Re: 26 spline front axle shafts
« Reply #33 on: March 04, 2004, 03:10:56 AM »
Here is the passenger's side 26 spline driveshaft.Its an old photo (6 months old) before I installed the Anvil.This driveshaft breaks very easy,mainly the whole inner CV.Spanish made possibly,but for sure not a green one,26 spline inner and outer side.And its a new one,I had just got it to replace a broken one then.The boots are from Wurth,very durable,they cannot be damaged.
At the upper part of the photo you can see part of the driver's side driveshaft.
« Last Edit: March 04, 2004, 03:15:59 AM by GRVIT »
Logged
Pages: 1 2 [3]   Go Up
« previous next »