Hello Guest
« previous next »
Pages: [1]   Go Down

trouble shooting engine misfire, 96 x-90

  • 8 Replies
  • 1847 Views

0 Members and 2 Guests are viewing this topic.

*

Offline sumozuki

  • 22
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
trouble shooting engine misfire, 96 x-90
« on: December 20, 2011, 10:31:12 PM »
1.6 16 v 96 x-90 auto, engine runs fine until I put the auto transmission in drive then it develops a misfire.
Logged
*

Offline talonxracer

  • 1284
  • 34
Re: trouble shooting engine misfire, 96 x-90
« Reply #1 on: December 21, 2011, 06:48:47 AM »
Have you changed plugs and wires? Any CEL codes? EGR system may need to be checked,cleaned.
Logged
Tim "the toolman" Taylor is my HERO !!!

The only GOOD Commie is the commie taking a dirt nap....
*

Offline sumozuki

  • 22
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
Re: trouble shooting engine misfire, 96 x-90
« Reply #2 on: December 23, 2011, 11:06:56 AM »
Thanks talon, i pulled up a iat code & fixed that, plugs, cap & wires were done also,will chk the egr now, i hope thats it,i'll let ya know! ??? ???
Logged
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: trouble shooting engine misfire, 96 x-90
« Reply #3 on: December 24, 2011, 12:58:36 AM »
I would also check the 02 sensor.  Sometimes a bad 02 can cause some weirdness.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline talonxracer

  • 1284
  • 34
Re: trouble shooting engine misfire, 96 x-90
« Reply #4 on: December 24, 2011, 08:56:36 AM »
Also a cracked exhaust mani(usually between #3 and #4) can cause a over rich condition resulting in misfires.
Logged
Tim "the toolman" Taylor is my HERO !!!

The only GOOD Commie is the commie taking a dirt nap....
*

Offline sumozuki

  • 22
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
Re: trouble shooting engine misfire, 96 x-90
« Reply #5 on: December 30, 2011, 07:05:47 PM »
swap egr, no change
Logged
*

Offline KJMac

  • 280
  • 3
  • Gender: Male
Re: trouble shooting engine misfire, 96 x-90
« Reply #6 on: December 31, 2011, 01:20:30 AM »
Quote from: sumozuki on December 30, 2011, 07:05:47 PM
swap egr, no change

Did you swap out the module...diaphram? That was the problem with mine!
« Last Edit: December 31, 2011, 01:42:45 AM by KJMac »
Logged
1994 Kick, 16v,header.2.5" exhaust,ported MAF,home made mufflers, K&N filter,5" lift with jeep LJ front springs on the rear and Ford ranger springs on front with 2 3/4 spacers,OME struts with 3" strut spacers,31/10.5 Hankook Dynapro MT on 15x7 black D's.
*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: trouble shooting engine misfire, 96 x-90
« Reply #7 on: December 31, 2011, 08:54:07 AM »
Misfire as in firing at wrong time, or not firing when required?  If is not firing properly when shifting into drive, leave in drive and pull plug wires one at a time to find bad cylinder.  Move injectors and retest to see if problem moved.
Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
*

Offline sumozuki

  • 22
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
Re: trouble shooting engine misfire, 96 x-90
« Reply #8 on: January 03, 2012, 07:57:10 PM »
Got er goin, THANK YOU EVERYONE 4Ur Input, KJMac you were right in the $$, Diaphram did fix it!
Logged
Pages: [1]   Go Up
« previous next »