whatcha need? I might have it. I have parts and pieces from four kicks out here and am prepping to sell my house.

couple things off the top of my head.

16v motor. ugly, corroded, but was promised to be a great motor. take your chances......100 bucks   <will part>

A few sets of 5.12's front& and rears (all pre 96)   75 bucks per cog

some decent interior pieces (trim)($?), tilt wheel column with key. 50 bucks.

gauge clusters. 40

green doors 30 ea.

short block core (was over-heated) but was running. 50

more.....ask.

all items near Corvallis Oregon and shipping additional

ok,..just found out my 5-speed is trashed and my rear end is howling...so ill need a rear 512 third and a 5-speed trans...you got one?

I know I have the rear third. the last 5-speed I have has the bell housing removed and tail housing removed so its just the actual transmission gear box. if you want to mess with it I will give it to you cheap.

I know I have the rear third. the last 5-speed I have has the bell housing removed and tail housing removed so its just the actual transmission gear box. if you want to mess with it I will give it to you cheap.

cool,..id be down for a rear third...have to pass on the tranny that you got,..maybe i can find a trans between here and your place to make the trip worth while...or if drew or jason or someone else comes your way i could get it from them...anyways...save one for me

If your not in a hurry I'd be happy to bring that third up to u. If u come to trask this weekend maybe you could get it then, or have u already got your truck torn apart?  Either way just let me know.

How much for both front calipers w/brackets and rotors?

Very clean console with cupholders and opening door on top?

Thanks,

Erik in Portland

How much for both front calipers w/brackets and rotors?

50 + shipping

Very clean console with cupholders and opening door on top?

Thanks,

Erik in Portland

man I wish I had about 1,000 of these!  go to the dealer there only 45'ish new! and very clean.

Very clean console with cupholders and opening door on top?

Thanks,

Erik in Portland

funny guy.....

What model had the one with the opening door, rear ashtray and two cup holders?

Consoles are only 45ish NEW? Really?
Thanks for the info, I will call tomorrow and see if they are still available.

Erik in Portland

What model had the one with the opening door, rear ashtray and two cup holders?

Consoles are only 45ish NEW? Really?
Thanks for the info, I will call tomorrow and see if they are still available.

Erik in Portland

I have found them in both two doors and four doors. just have to check with parts guy. I know one person that just ordered one last week.

If your not in a hurry I'd be happy to bring that third up to u. If u come to trask this weekend maybe you could get it then, or have u already got your truck torn apart?  Either way just let me know.

drew...that would be cool,..except my tracker is down due to the trans..although i could meet up with ya somewhere in my truck...definitly not wheeling my truck!!!...lol

What model had the one with the opening door, rear ashtray and two cup holders?

Consoles are only 45ish NEW? Really?
Thanks for the info, I will call tomorrow and see if they are still available.

Erik in Portland

You will want to look at a '96 - '98 sidekick model for the cup holder center console.  I just bought one from Duncan at Power Suzuki in Salem, he gives all Mid Valley Crawlers a discount (I think it's 20%) it might be worth the time to call and talk to him.  The $45 - $50 dollar price was for just the big main plastic console, all the little parts like clips, doors, ashtray all have to be ordered separately.  Duncan is a really nice guy and has been very willing to look things up and let me look through his parts books to compare different years and then getting a discount makes it even that much better!!!  Mine isn't here yet and I know that he has the part numbers that I ordered written down in a binder he keeps on his desk, you might just ask him to match or verify that it is the same number that I'm getting, he might know me as Andrew because that is what's on my credit card :0)  Good luck!!

drew...that would be cool,..except my tracker is down due to the trans..although i could meet up with ya somewhere in my truck...definitely not wheeling my truck!!!...lol

OK, make the arrangements with Jared and I'll try and get over there when I can and then I'll let you know the next time I'm in P-town.  PM me your phone number, I don't think I have it from last time.

I called the Zuki place in Portland today and he said the 96 was the only one with cupholders visible in the pictures he looked at, 94-95 didnt have them in the pics he said. He quoted $93 for the main part only and they are out of stock at all warehouses in the US so it would come from Japan and could take a couple of months. It was available in grey but the opening door on top was only available in black. Guess I will keep looking. If anybody wants one of the cupholder consoles without the door on top I have a pretty clean one and beat one with the door on top, either for $25 shipped. Pics available.

Thanks,


Erik in portland