Hello Guest
« previous next »
Pages: [1] 2   Go Down

parting out 95 and 96 Trackers

  • 17 Replies
  • 2953 Views

0 Members and 1 Guest are viewing this topic.

*

Offline smife

  • 179
  • 4
parting out 95 and 96 Trackers
« on: July 14, 2010, 07:25:57 PM »
I'm parting out two Trackers. Message with wants or needs. Chris
Logged
*

Offline ncspack7civic

  • 108
  • 0
  • Gender: Male
Re: parting out 95 and 96 Trackers
« Reply #1 on: July 15, 2010, 04:19:13 PM »
What kind of thirds do they have and also what spline count are they? THanks, Paul
Logged
*

Offline Medford

  • 184
  • 3
  • Gender: Male
Re: parting out 95 and 96 Trackers
« Reply #2 on: July 15, 2010, 05:52:59 PM »
Are they stock height?  If so I am in the hunt for the steering center link, and....  the name is not coming to me, but the triangle shaped piece that is connected to the top of the rear diff on one end and tied to frame on the other end.  I also need the boot/console piece that goes over the parking brake.  Is all the hardware there for the soft tops?  Mine has a best top hard top, but in summer my bride would like it to have a soft top.
Logged
96 Tracker LSI, 2.5" Pro Comp lift with cooper 30X9.5 STT tires.  A bit of trim and beating to make the front work.
*

Offline FireCkrEd

  • 246
  • 3
  • Gender: Male
    • My Church-San Pedro Revival Fellowship
Re: parting out 95 and 96 Trackers
« Reply #3 on: July 15, 2010, 08:50:59 PM »
How are the air conditioner/ fan switches ? Glove box door ?  are they 2 door or 4 door ? I also have a friend who needs a passenger door and a rear pass door due to an idiot who turned into him at a stop sign.


                                                     Ed
Logged
93 4dr Kick, stock, + 95 4dr W/TTough kit, Toy axles, 4.24 xfercase gears, 5.71 gears, Ramsey 9500 winch, twin stick xfercase, 33" BFG's
97, 4dr with a 2" lift (needs an engine re-build)
Spirit Filled Christian
*

Offline jdcone

  • 13
  • 0
Re: parting out 95 and 96 Trackers
« Reply #4 on: July 18, 2010, 06:30:09 PM »
Any hardtops?
Logged
*

Offline smife

  • 179
  • 4
Re: parting out 95 and 96 Trackers
« Reply #5 on: July 18, 2010, 08:21:42 PM »
No hardtops. Sorry.
Logged
*

Offline smife

  • 179
  • 4
Re: parting out 95 and 96 Trackers
« Reply #6 on: July 18, 2010, 08:26:00 PM »
The 95 is meeting its maker Thursday  >:D  Unless anyone wants to save it :police:  Its basically a frame and tub, all wiring, yes its rusty $100. Southeastern, Ohio
« Last Edit: July 20, 2010, 01:28:40 PM by smife »
Logged
*

Offline smife

  • 179
  • 4
Re: parting out 95 and 96 Trackers
« Reply #7 on: July 22, 2010, 04:43:52 PM »
The 95 is gone. The 96 is going Monday. If anyone needs anything let me know this weekend. Chris
Logged
*

Offline Soupy

  • 206
  • 2
Re: parting out 95 and 96 Trackers
« Reply #8 on: July 22, 2010, 09:39:15 PM »
do you have an ecu for a 95 , automatic transmission?
Logged
*

Offline 98redkick

  • 78
  • 1
Re: parting out 95 and 96 Trackers
« Reply #9 on: August 16, 2010, 09:46:51 PM »
Got a throttle position sensor for a 16v 1600?

Thanks
Logged
*

Offline smife

  • 179
  • 4
Re: parting out 95 and 96 Trackers
« Reply #10 on: August 17, 2010, 08:52:49 AM »
Sorry just sold it last week to Offroadohio.
Logged
*

Offline nprecon

  • 2318
  • 52
  • Gender: Male
  • ONWARD... through the fog!
Re: parting out 95 and 96 Trackers
« Reply #11 on: August 17, 2010, 07:16:32 PM »
What about the front and rear diffs on the '96?  I believe they should be 5.12s (with a three speed auto or manual tray). 
Logged
'02 Chezuki Tracker with a 2 Liter and 5spd.  It works for me!!!
*

Offline 96Kicker

  • 1043
  • 0
  • Gender: Male
  • http://www.zukiworld.com/forum/gallery/3710_25_10_
    • www.myspace.com
Re: parting out 95 and 96 Trackers
« Reply #12 on: August 31, 2010, 04:43:16 PM »
have any front grilles?
Logged
<a href="http://s220.photobucket.com/albums/dd126/fletcher9160/?action=view&current=Zuktahgreenblur.jpg" target="_blank"><img src="http://i220.photobucket.com/albums/dd126/fletcher9160/Zuktahgreenblur.jpg" border="0" alt="Zuktah club sticker"></a>TJ
#801-554-3281
96 kick 4 door with custom 3 inch susp lift and pre runner front bumper,2 inch bod
*

Offline ColtonP

  • 147
  • 0
  • Gender: Male
Re: parting out 95 and 96 Trackers
« Reply #13 on: August 31, 2010, 05:19:10 PM »
I'm looking for a transmissio transfer case and rear end is eather a 3spd auto attached to a 1.6 16vlve ???
Logged
1987 Suzuki samurai BONE STOCK
(SOLD)1990 Samurai 1.6 8v swap, Arb front air locker, spool rear, RRO coil suspension, Chromoly front axles, 33x13.5-15 Swampers, ARB Bumpers, Slider, fender flares, 6.5:1 transfer case, True beadlocks, 1.5" wheel spacers,Roll cage. All in all a lil over 10k in parts uuuggghhhh!!!!!(SOLD)
(SOLD) 2000 Chevy tracker, 4 door, 4x4, auto trans, 2 inch lift,265/70r16 (SOLD)
(TOTALED)1995 tracker lsi, tintop, 3speed auto trans, 2 inch lift, 2 1/2 inch exhaust, 30x 9.5 bfg a/ts, custom front bumper.(TOTALED)
*

Offline tipover

  • 422
  • 4
  • Gender: Male
Re: parting out 95 and 96 Trackers
« Reply #14 on: September 02, 2010, 05:15:58 PM »
need a set of headlights
Logged
Wheeler-87 Samurai JX. 7" lift, 1.6 TBI, lockers hybrid rear, 33" Swampers, 6 to 1s in a billet housing.
RV Dingy-2003 2 door tracker
Tow-97 PSD F250 Crew SB Dana 60 conversion
87 samurai-spoa ZookEV electric conversion.
RV- 31' Monaco Mckenzie
Pages: [1] 2   Go Up
« previous next »