The title speaks for itself... please help me with ways to get 2-3 inches of suspension lift for under a couple hundred bucks; any little tidbit helps. 94 4-door sidekick

thanks

Nolan

Coil Spacers and Strut Mount Flip = Cheap.

Try jeff1997.

His Profile: http://www.zukiworld.com/forum/index.php?action=profile;u=5107

Virtual lift!
http://www.geocities.com/redidbull1/wheelwells.html

Coil Spacers and Strut Mount Flip = Cheap.

Try jeff1997.

His Profile: http://www.zukiworld.com/forum/index.php?action=profile;u=5107

X2

I bought from Jeff1997.  I forget what I actually paid...but it's a great deal for a few safe, reliable inches of ride height....and you can easily stick 30" tires under a 2 door track/kick with his lift.

I also have jeff's spacers, with mustang shocks and the diff spacer, it flexes pretty well.  Can't beat it for the price. Here's a link to his pricing:

http://www.zukiworld.com/forum/index.php?topic=24203.0

Ditto, I have jeffs spacers too, and they are great. Got 30"s under it with minor trimming inside front wheel well.

Hey, the man said "DIY", people!


Well, here ya go...:
http://www.zukiworld.com/forum/index.php?topic=21596.msg180568#msg180568

2-3 inches of suspension lift for under a couple hundred bucks

Sorry dude, I was payin more attention to the " under a couple hundred bucks" part , Jeff's lift with shocks, is about 200$ Either way to "do it yourself" you'll need longer springs or spacers, longer shocks, strut spacer or mount flip.  Sounds like alot of extra effort to figure out all the "DIY" stuff when Jeff sells a package deal within the stated price range. Guess I'm just lazy  

P.S. Question about the *gulp* wood spacers, Does pressure treating make'em waterproof?  Just wonderin.

If you are planning on going through with cutting up some wooden spacers you might as well just buy a chunk of Poly and cut them out of it instead. 

If you are planning on going through with cutting up some wooden spacers you might as well just buy a chunk of Poly and cut them out of it instead. 

Better yet save yourself the hassles and SAFETY issuses and just buy them from me. WOOD? seriously? If anyone has actually done that , Please stay away from me on the road.

Quote from: Drone637 on March 31, 2009, 01:24:55 PM

If you are planning on going through with cutting up some wooden spacers you might as well just buy a chunk of Poly and cut them out of it instead. 

Better yet save yourself the hassles and SAFETY issuses and just buy them from me. WOOD? seriously? If anyone has actually done that , Please stay away from me on the road.

Respect the persimmon!

I got a 1.5" coil spacer lift, 2" rear coil spacer lift, and 1.5" strut spacer lift. With monroe mustang shocks. I got them from jeff1997 and I paid $200 dollars.

I am selling this for $150 shipped to 48 us states. It has about 200 miles on it. Cant even tell it was used.

Let me know if interested. THanks

I'd never sell Jeff's spacers.  They're like space age moon plastic.  I can't believe he sells them so cheap!   If anything...I'll just get bigger springs, and add to the lift I already have.  I'll probably actually have to get a diff spacer from him soon.

Good luck though.

Spacers made out of wood??  Forget it!  But a couple of old tires can allow you to cut some rings out of them, use it as spacers and it work!  I've try it two years ago and they still in place.

I'm running Jeffs Spacers also, cheap, reliable, and great results. THen I got a 2" BL for about the same. Pretty cheap for 4" of lift.