Hello Guest

t-case gears for GV 2500cc

  • 11 Replies
  • 2258 Views

0 Members and 1 Guest are viewing this topic.

*

Offline gv1600

  • 83
  • 0
  • Gender: Male
t-case gears for GV 2500cc
« on: January 12, 2008, 03:36:52 AM »
Hi,

a simple question cause we have to deside what to do :

we have a GV 2.500cc (2002+ model) and we want to put a crawler gear set like Calmini, or Trailtough, ect.

Does anyone have already done that?
Does the 2.5 L GV uses the same t-case box with 1600cc or 2000cc  ?

I know that the 2.5L gearbox is different compaired to 1600 but also that its possible to fit a 1600 t-case with crawler gears behind the 2.5 L gearbox.

We are ready to buy the crawler set but could anyone give a hand with that?

Thanks for your time, waiting your replies!
Suzuki GV Calmini 2,5'' - Full Steel V6 Frond Diff - 205/80/16 KL71 -
4.24 t-case - T-Max 6500 - VTTR Snorkel - ProTrack Air-Lockers F/R

*

Offline ZeusZuki

  • 411
  • 0
  • Gender: Male
  • I like em low with big feet. New Zealand.
Re: t-case gears for GV 2500cc
« Reply #1 on: January 12, 2008, 06:11:11 PM »
My understanding is that the crawler gears only fit in the 2.5 V6 auto transfer cases and NOT the manual cases so if you have an auto then your in luck  ;D
1600 Escudo / Kick, beam front, coils all round, 37 MTR's, 97" wheelbase, locked fr & rr,twin stick, front stock ratio, Calmini 5.14 t box rear, Warn XD9000i winch, blah blah!

2.0 V6 auto, Calmini 3" kit, 33" jandles, LT struts, blah blah

2.5 V6 man GV, Calmini 2.5" kit, 235/85x16 jandle

Re: t-case gears for GV 2500cc
« Reply #2 on: January 13, 2008, 06:58:41 AM »
I have Calmini t-case gears in my 2000 GV auto.

*

Offline gv1600

  • 83
  • 0
  • Gender: Male
Re: t-case gears for GV 2500cc
« Reply #3 on: January 13, 2008, 09:47:19 AM »
I think that its not possible to fit in a manual 2.5 t-case too, but has anybody tryied that yet ?

Just to know what the differences are ?

Is it better to get a t-case with crawler set from a 2.0L or a 1.6L and bolt it to the 2.5 L manual gearbox?

Anyone who have done that ?

Thanks 8)
Suzuki GV Calmini 2,5'' - Full Steel V6 Frond Diff - 205/80/16 KL71 -
4.24 t-case - T-Max 6500 - VTTR Snorkel - ProTrack Air-Lockers F/R

Re: t-case gears for GV 2500cc
« Reply #4 on: January 13, 2008, 10:43:06 AM »
Yeah..thats something I would like to know to!

Re: t-case gears for GV 2500cc
« Reply #5 on: January 14, 2008, 12:44:27 PM »
I think that its not possible to fit in a manual 2.5 t-case too, but has anybody tryied that yet ?


Yes, Calmini has, and no, they don't work.  Input shaft is either too long or too short, I can't remember which.

Quote
Is it better to get a t-case with crawler set from a 2.0L or a 1.6L and bolt it to the 2.5 L manual gearbox?


Can't be done, as I mentioned above, it's the input shaft issue.

Not to get Pirate on your arse, but this could have been answered from a proper SEARCH of this forum. :P

http://www.zukiworld.com/forum/index.php?topic=13570.0
http://www.zukiworld.com/forum/index.php?topic=18996.0

Just to name a couple.  ;)
« Last Edit: January 14, 2008, 12:48:22 PM by Yankee-Tim »

*

Offline cj

  • 1276
  • 0
  • I drive a really big ATV
Re: t-case gears for GV 2500cc
« Reply #6 on: January 17, 2008, 02:20:09 AM »


Not to get Pirate on your arse, but this could have been answered from a proper SEARCH of this forum. :P
 

But sometimes it is tempting  ;)

Re: t-case gears for GV 2500cc
« Reply #7 on: January 17, 2008, 01:28:09 PM »
But sometimes it is tempting  ;)

LOL!  I swear, if one more person asks, "What's the largest tire I can run on a stock Sidekick?", I'm gonna go postal!  :police:

*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: t-case gears for GV 2500cc
« Reply #8 on: January 17, 2008, 02:22:12 PM »
But sometimes it is tempting  ;)

LOL!  I swear, if one more person asks, "What's the largest tire I can run on a stock Sidekick?", I'm gonna go postal!  :police:

Must be that time of year again.
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com

*

Offline ZeusZuki

  • 411
  • 0
  • Gender: Male
  • I like em low with big feet. New Zealand.
Re: t-case gears for GV 2500cc
« Reply #9 on: January 17, 2008, 10:35:19 PM »
Now now gentlemen , don't flame the newbies  ::)  but it is sooooooooooooooooooooooooo difficult to resist  >:D

NEWBIES : Search BEFORE you post  >:(
1600 Escudo / Kick, beam front, coils all round, 37 MTR's, 97" wheelbase, locked fr & rr,twin stick, front stock ratio, Calmini 5.14 t box rear, Warn XD9000i winch, blah blah!

2.0 V6 auto, Calmini 3" kit, 33" jandles, LT struts, blah blah

2.5 V6 man GV, Calmini 2.5" kit, 235/85x16 jandle

*

Offline blacknight

  • 987
  • 1
  • Gender: Male
    • Gonzookin
Re: t-case gears for GV 2500cc
« Reply #10 on: January 18, 2008, 12:41:52 PM »
Must be that time of year again.

it's Tim you ment "time of the month" right  :P


George

Re: t-case gears for GV 2500cc
« Reply #11 on: January 18, 2008, 02:55:00 PM »
Must be that time of year again.

it's Tim you ment "time of the month" right  :P


George

Haha, very funny muthafukker.  :'(

Hey, when you gonna have yer buddy down the street from me hook me up with local trails?