Hello Guest
« previous next »
Pages: [1]   Go Down

leaky distributor

  • 12 Replies
  • 1843 Views

0 Members and 3 Guests are viewing this topic.

*

Offline SKAsammy

  • 79
  • 0
  • Gender: Male
  • 1991 samurai
leaky distributor
« on: April 17, 2007, 12:54:21 PM »
Do i have to order these o rings from petroworks or can i pick em up at any auto parts store?
Logged
1991 SAMURAI
6"spoa
2" body  lift
8000 lb winch
30/9.5/15 BFG all terrains roll on bedliner in and out homemade bumper 1996 Silv. 4" lift 35's many mods
*

Offline KickTurn

  • 53
  • 0
  • My wife likes the smell of petroleum products.
Re: leaky distributor
« Reply #1 on: April 17, 2007, 04:06:18 PM »
I don't know about PetroWorks, but I ordered on from Hawk that didn't fit.  Local auto parts places didn't have the right size.  After a lot of trial and error, I found one at a specialty seals place that fits just right.
Logged
95 Kick JLX 4x4 4dr 1.6 16v. 
235s, manual hubs.
*

Offline BigPig

  • 276
  • 0
  • Gender: Male
Re: leaky distributor
« Reply #2 on: April 17, 2007, 05:16:55 PM »
If you have a Zuki dealer in your area you should check.  Lots of times those little parts are just as cheap from the dealer and you know it's right.
Logged

'89 Sidekick w/ 4.5" of lift.
*

Offline Amilla

  • 1076
  • 0
  • Gender: Male
  • Toyota running gear was made for a samurai!
Re: leaky distributor
« Reply #3 on: April 17, 2007, 05:28:36 PM »
Quote from: SKAsammy on April 17, 2007, 12:54:21 PM
Do i have to order these o rings from petroworks or can i pick em up at any auto parts store?

Hey Skasammy, what year sammy do you have?
Logged
88 Samurai, Sprung Up, Geared Down, Locked,With Yotas.
*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: leaky distributor
« Reply #4 on: April 17, 2007, 07:56:01 PM »
Quote from: KickTurn on April 17, 2007, 04:06:18 PM
I don't know about PetroWorks, but I ordered on from Hawk that didn't fit.  Local auto parts places didn't have the right size.  After a lot of trial and error, I found one at a specialty seals place that fits just right.

Oh great.  Now ya tell me.  I bought the Hawk ones for 3 of our Zuks but haven't put them on yet.   :(
Logged
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: leaky distributor
« Reply #5 on: April 17, 2007, 07:58:54 PM »
the ones I got from HAWK worked great.
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline daddyizzle

  • 728
  • 0
  • Gender: Male
  • Colorado is still my home!!
Re: leaky distributor
« Reply #6 on: April 17, 2007, 08:00:18 PM »
Maybe someone should call Hawk to address this or at least bring it to their attention?

-Adam
Logged
If all criminals were behind bars, there would be no one left to patrol the streets.

86 Samurai Tin-Top stock with a Harley 44 sidedraft carb
*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: leaky distributor
« Reply #7 on: April 17, 2007, 08:07:57 PM »
Quote from: daddyizzle on April 17, 2007, 08:00:18 PM
Maybe someone should call Hawk to address this or at least bring it to their attention?

-Adam

If ours don't fit I'll let him know.
Logged
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed
*

Offline 1badzuk

  • 96
  • 0
  • Gender: Male
Re: leaky distributor
« Reply #8 on: April 17, 2007, 09:39:49 PM »
Logged
87 sammy 33's sometimes on 35s hole lot of extras 4 link arb lockers built tcase and tranny 1.6 dual weber carbs racing seats snorkle and so on.........ALOT MORE..........
*

Offline SKAsammy

  • 79
  • 0
  • Gender: Male
  • 1991 samurai
Re: leaky distributor
« Reply #9 on: April 18, 2007, 03:48:25 AM »
its a 91
Logged
1991 SAMURAI
6"spoa
2" body  lift
8000 lb winch
30/9.5/15 BFG all terrains roll on bedliner in and out homemade bumper 1996 Silv. 4" lift 35's many mods
*

Offline Amilla

  • 1076
  • 0
  • Gender: Male
  • Toyota running gear was made for a samurai!
Re: leaky distributor
« Reply #10 on: April 18, 2007, 10:02:44 AM »
Maybe it changes for the new years, isnt 91 fule injected?

But i do need to get a new distributer O-ring, The back of the engine is coverd in about an inch of gunk.


Has anyone else had problems with there O-rings?


Amilla
Logged
88 Samurai, Sprung Up, Geared Down, Locked,With Yotas.
*

Offline SKAsammy

  • 79
  • 0
  • Gender: Male
  • 1991 samurai
Re: leaky distributor
« Reply #11 on: April 19, 2007, 03:54:49 AM »
well i ordered em from spidertrax i hope they get here by the weekend cause im losing a lot of oil!
Logged
1991 SAMURAI
6"spoa
2" body  lift
8000 lb winch
30/9.5/15 BFG all terrains roll on bedliner in and out homemade bumper 1996 Silv. 4" lift 35's many mods
*

Offline 1badzuk

  • 96
  • 0
  • Gender: Male
Re: leaky distributor
« Reply #12 on: April 23, 2007, 07:09:46 PM »
i got them from spider trax and they came with in 5 days put  em on no leaking top of trans is dry theres instrutions on izok on how to do it if your not sure
Logged
87 sammy 33's sometimes on 35s hole lot of extras 4 link arb lockers built tcase and tranny 1.6 dual weber carbs racing seats snorkle and so on.........ALOT MORE..........
Pages: [1]   Go Up
« previous next »