Hello Guest

CAMBER BOLTS

  • 6 Replies
  • 1288 Views

0 Members and 2 Guests are viewing this topic.

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
CAMBER BOLTS
« on: March 10, 2007, 01:16:32 PM »
Does anyone know where I can get some camber bolts for my 94 tracker in which i can use a money order to buy? I dont have a credit/debit card.  Or if anyone has a set they'll sell me that'd be great.
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline HotRod

  • *
  • 4334
  • 2
  • Gender: Male
  • 95 Tracker
    • cardomain.
Re: CAMBER BOLTS
« Reply #1 on: March 10, 2007, 04:36:25 PM »
You could always run down to your local Wheel and tire shop
95 2dr Geo Tracker with Calmini 6"inch combo lift, 32'inch BFGs M/Tlocked and loaded--D.D is my 06 Racy RED Aerio SX AWD

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: CAMBER BOLTS
« Reply #2 on: March 10, 2007, 04:43:33 PM »
will they have bolts for major adjusting? cause mines off and i dont even have my coil spacers on yet
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline john1974

  • 617
  • 1
  • Gender: Male
  • http://zuknation.net
    • Zuknation
Re: CAMBER BOLTS
« Reply #3 on: March 10, 2007, 06:07:44 PM »
Boondoxmotorsports.com has some, but most local autoparts stores carry them or will order them....

 *Image Removed* [/URL]  *Image Removed* [/URL]

*

Offline olija

  • 770
  • 2
  • Gender: Male
    • Check out my cardomain
Re: CAMBER BOLTS
« Reply #4 on: March 10, 2007, 08:14:44 PM »
Just go to the alignment shop. You will have to get them to install them anyway.
97 Sidekick 4door 5 speed, 1.5 spacer lift, 2" body lift, CJ rims, locked rear, 31's, 4:1 low <SOLD>
01 Vitara 2.0L 5 speed, 2.5" Calmini lift, 2" body lift, Sidekick rims, locked rear, 31's, 4:1 low, 5.13 diffs <SOLD>
03 XL7 2.7 5 speed, 4.5" AE lift with OME springs, 2" AE body lift, 5.13 diffs, 3:1 low, 235/80R17 BFG AT's on Ultra 17x8 with 1" spacers, skid plates, Balmer Fab front bumper

*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: CAMBER BOLTS
« Reply #5 on: March 10, 2007, 08:21:54 PM »
Just go to the alignment shop. You will have to get them to install them anyway.

no i go to a vo tech school for auto mechanics but we dont carry camber bolts
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD

*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: CAMBER BOLTS
« Reply #6 on: March 10, 2007, 09:44:23 PM »
...but most local autoparts stores carry them or will order them....

I had a set of two ordered in at my local O'Reillys for, I think, 12 bucks a piece.  The same should be true for all the other auto parts chains.

Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com