Pages: [1] Go Down

I have a Weber question.

4 Replies
1127 Views

0 Members and 1 Guest are viewing this topic.

phloop

I have a Weber question.

« on: January 24, 2007, 07:31:19 PM »

I have a weber on my Zuki and have been having a few problems with it. I am wondering if any one knows the settings for tuning this thing. Looking for jetting numbers and the like, both for a 1.3 and a 1.6. It is on a 1.3 now but this spring I will be swapping in a 1.6.

Logged

ROSS

1412
0
Gender:
WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT

Re: I have a Weber question.

« Reply #1 on: January 24, 2007, 07:39:51 PM »

my weber is used for a paperweight on my workbench

Logged

87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR BFG 31 X10.50 X 16", EXO SKELLETON,

samwisper

Re: I have a Weber question.

« Reply #2 on: January 24, 2007, 10:37:58 PM »

I may have your answer. I just rejetted my weber. Here are some jet info. Primary Airbleeds 160 Secondary Airbleeds 170 Primary and Secondary Mains 140 Primary and Secondary Idie Jet 60. This should get you started. Work for me. Also make sure to open the exhaust. Free flow muffler and 2in pipe.

Logged

ack

1659
34
Gender:
Professional askhole

Re: I have a Weber question.

« Reply #3 on: January 25, 2007, 03:25:22 AM »

Lots of links to setup stuff (articles and Weber installation docs) at Ack's FAQ (see link in signature). Do a search for weber.

Hope this helps!

Logged

Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ http://www.acksfaq.com

phloop

Re: I have a Weber question.

« Reply #4 on: January 25, 2007, 08:31:37 AM »

Sam, thanks, that is what I am looking for. I am guessing these numbers are for a 1.3? And the exhaust is already taken care of, from the header back.

Ack, your link is missing. That or I just can't find it.

Logged

Pages: [1] Go Up

« previous next »