what if the formula for points on a rti ramp or can shear height be figured in?
i get 36" going up and 35" going backward ,up this concrete ramp.
i found this ,

can it be used in my case , 87" wb with 38" tires

Wheelbase (hub to hub) devided by horizontal length traveled up the ramp= Number
then multiply that Number by 1000 and that will give you your RTI.

For what ever degree inclien you are on at the loadingh dock (10-15 deg???) you scored well over 1000

Zig

thx i needed the clarification

running shockless it looks like???   

we need measurements to see how far the shocks need to extend and contract.

running shockless it looks like???   

Just gotta make sure to drive extra slow 


Do you get any drive line binding, or bad vibs from the rear? I belive those are toy axles but i could be wrong.

Amilla

Quote from: stock93tracker on January 02, 2007, 04:32:16 PM

running shockless it looks like???   

Just gotta make sure to drive extra slow 


Do you get any drive line binding, or bad vibs from the rear? I belive those are toy axles but i could be wrong.

Amilla

i kept her under 40mph she was a little bouncy
there was a little shake from the rear ,but snapping the rear driveshaft down at the river earlier fixed it.yeh are you sure on the toy axls?

we need measurements to see how far the shocks need to extend and contract.

ahh, I see..  Try running it on the highway at 55, see what happens and report back..  IM curious..