Hello Guest
« previous next »
Pages: [1]   Go Down

dumb question... how does our DOHC on the 2.0L work?

  • 5 Replies
  • 1431 Views

0 Members and 1 Guest are viewing this topic.

*

Offline r3cc0s

  • 321
  • 0
  • Gender: Male
dumb question... how does our DOHC on the 2.0L work?
« on: November 23, 2006, 11:52:56 AM »
Is it one cam for intake valves, and another for exhaust?

Or would I like to belive it has 2 cams for variable valve timing :D lol
Logged
03' 2.0L CAMI Tracker w/ 1.5" Front Spacers, 2" Rear Spacers, 1 & 1/4" poly-rubber rear spacer w/ hose clamps, Monroe Crown Vic interceptor rear shocks,1/4" bumpstop extenders, 1.5" strut Extenders, removal of sway bar and strut bar + plenty of cutting for 245/75/16 Goodyear MTRs
*

Offline bzzr2

  • 1011
  • 3
Re: dumb question... how does our DOHC on the 2.0L work?
« Reply #1 on: November 23, 2006, 12:21:15 PM »
hhmmm, not sure there, i'm not an engine guy! 
Logged
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4
*

Offline IanL

  • 466
  • 5
  • Gender: Male
  • You know the answer - DIY :-)
Re: dumb question... how does our DOHC on the 2.0L work?
« Reply #2 on: November 23, 2006, 02:47:21 PM »
Quote from: r3cc0s on November 23, 2006, 11:52:56 AM
Is it one cam for intake valves, and another for exhaust?
Yes

Quote
Or would I like to belive it has 2 cams for variable valve timing :D lol
Sorry, the camshafts are just plain chain driven.  No VVT.
Logged
'98 GV V6, '96 X-90 with RRO 2.5" lift and 195/80 R15, '93 Cappuccino.
*

Offline r3cc0s

  • 321
  • 0
  • Gender: Male
Re: dumb question... how does our DOHC on the 2.0L work?
« Reply #3 on: November 23, 2006, 02:48:08 PM »
do you know what RPM is peak torque met at?
Logged
03' 2.0L CAMI Tracker w/ 1.5" Front Spacers, 2" Rear Spacers, 1 & 1/4" poly-rubber rear spacer w/ hose clamps, Monroe Crown Vic interceptor rear shocks,1/4" bumpstop extenders, 1.5" strut Extenders, removal of sway bar and strut bar + plenty of cutting for 245/75/16 Goodyear MTRs
*

Offline IanL

  • 466
  • 5
  • Gender: Male
  • You know the answer - DIY :-)
Re: dumb question... how does our DOHC on the 2.0L work?
« Reply #4 on: November 24, 2006, 09:01:06 AM »
Quote from: r3cc0s on November 23, 2006, 02:48:08 PM
do you know what RPM is peak torque met at?
4,000 rpm
Logged
'98 GV V6, '96 X-90 with RRO 2.5" lift and 195/80 R15, '93 Cappuccino.
*

Offline bzzr2

  • 1011
  • 3
Re: dumb question... how does our DOHC on the 2.0L work?
« Reply #5 on: November 24, 2006, 11:19:02 AM »
i don't have the docs on that but 4000 sounds right or at least where the power really kicks in, between 4000 & 5000 i have actual power....  well, sorta.
Logged
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4
Pages: [1]   Go Up
« previous next »