Hello Guest

Gears

  • 15 Replies
  • 2693 Views

0 Members and 2 Guests are viewing this topic.

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Gears
« on: July 26, 2006, 06:18:43 AM »
I am having a hell of a time understanding all the gear ratios. (Sorry, used to cars with only tranny gears).  So let me ask some question and see if I can get my self straightned out.

1. What is the stock gear ratios of manual trans 94 kick?  Front diff, Transfer Case, Rear Diff

2. What is 10 bolt vs. 12 bolt? Which do I have?

3. If I add bigger tires what gears should I change?

4.What gear ratios are available for manual kick?

5. If I add lockers does this effect what gears are in my kick?

5. Anything else I should know?

I really appreciate anybody taking time to help me out.  I have learned alot from this site.
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: Gears
« Reply #1 on: July 26, 2006, 06:43:43 AM »
   Here's a link to a listing of what gear ratios where in what models of Trackers/Kicks from the Zuwharrie site.

http://bbs.zuwharrie.com/content/topic,15579.0.html
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: Gears
« Reply #2 on: July 26, 2006, 08:17:41 AM »
Ok so 5.12 is most likely my stock gear ratio.  Is this for the front or back diff or the transfer case. 
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: Gears
« Reply #3 on: July 26, 2006, 08:19:01 AM »
Ok so 5.12 is most likely my stock gear ratio.  Is this for the front or back diff or the transfer case. 
  front & back dif.  You shouldn't need to change any gears to run a tire up to around 31", maybe larger.  A locker does not effect your gears.
« Last Edit: July 26, 2006, 08:25:49 AM by LilRed »
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: Gears
« Reply #4 on: July 26, 2006, 08:22:51 AM »
Alright, thanks that is one cloudy area that finally has some sun.  Now on to the transfer case.

EDIT: Found this:

Transmission     = 5 Speed Manual
Transfer Case    = Stock (Tracker T-Case HIGH Range = 1:1)
Ring and Pinion  = 5.12 (Stock Gears for 5 Speed Manual Trans)


So what is the 4 low range ratio?
« Last Edit: July 26, 2006, 08:25:28 AM by fullsink18 »
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline locjaw

  • *
  • 2045
  • 22
  • Gender: Male
Re: Gears
« Reply #5 on: July 26, 2006, 08:25:50 AM »
the transfer case , in high range, is 1:1 straight thru. in low range it is (i beleive) is like 1.816:1
good luck
jason
1995 Sidekick SAS'd "Trail Slayer"
1993 4 door lifted "Road Warrior"
1995 4 door stocker "CreamPuff"

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: Gears
« Reply #6 on: July 26, 2006, 08:32:47 AM »
I should have read a bit farther instead of getting excited. I found the following:

Tracker 5 Speed Manual Transmission /T ransfer Case / Ring & Pinion Gearing Ratios
Gear ratios
   1st 3.65
   2nd 1.95
   3rd 1.38
   4th 1.00
   5th 0.86
   Reverse 3.67
Transfer gear ratios
   Low (4WD) 1.82
   High 1.00
Differential ratio 5.12

Question 1 is checked off. 

As for Question 3 I think I should change my R&P to 5.83 for the 31 inch tires.  Right?

As for the rest of the questions keep the info coming.  Thanks
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline kirknd4spd

  • 333
  • 0
  • Gender: Male
Re: Gears
« Reply #7 on: July 26, 2006, 10:47:13 AM »
the 5.12s should handle 31" tires, but it cant hurt to switch to 5.83s
89 Sidekick - 2 door soft top, 1.6, auto, 4x4, 3" suspension lift, 31x10.50's on 15x8 Mickey Thompsons, long tube header

*

Offline Jookycola

  • 372
  • 0
  • Gender: Male
  • 1995 Tracker LSi 4x4 16v 2-door
    • My car domain site for the tracker.
Re: Gears
« Reply #8 on: July 26, 2006, 11:04:36 AM »
Yeah, i STILL don't know what the heck a 10-bolt and 12-bolt is???
or how you find out?
and i've been driving these things for almost 20 years.
weird.
  [/url]

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: Gears
« Reply #9 on: July 26, 2006, 11:18:53 AM »
Well I wont be getting 5.83s and time soon so 5.12 will have to handle the 31s.

Yeah, i STILL don't know what the heck a 10-bolt and 12-bolt is???
or how you find out?

LOL
If I could figure out what I have that would be good to know.

Calmini's Site has this listed for their R&P Gears.
10 Bolt '89-'98 Front
12 Bolt '93-'98 Rear (discontinued)

So maybe I have a 10 bolt up front and a 12 bolt in the rear???

But there 12 bolt R&P is discontinued, so I need to find somewhere else to get those.  If indeed I have a 12 bolt.

To double check I can put the same locker in my kick with 5.12s or 5.83?

Question 1: Check
Question 3: Check
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Gears
« Reply #10 on: July 26, 2006, 01:07:24 PM »
Yeah, i STILL don't know what the heck a 10-bolt and 12-bolt is???
or how you find out?
and i've been driving these things for almost 20 years.
weird.


10-bolt/12 bolt refers to the number of bolts that hold the ring gear into the diffcarrier.
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org

*

Offline Quaddawg

  • 1622
  • 1
  • Gender: Male
  • Flex and Ground Clearance is HIGHLY overrated!!
    • My Ebay Store
Re: Gears
« Reply #11 on: July 27, 2006, 05:40:49 AM »
Yeah, i STILL don't know what the heck a 10-bolt and 12-bolt is???
or how you find out?
and i've been driving these things for almost 20 years.
weird.


10-bolt/12 bolt refers to the number of bolts that hold the ring gear into the diffcarrier.

Yeah, and the poster has 12 bolt in the rear, and they AREN'T available.    Boondocks is/was going to order some.. but they haven't yet.

Good luck finding them.


My Kick was a DOG with heavy 31" tires and 5.12's  but others say different things.... I found a set of 5.62's by chance, and that made it quite a bit better.
1996 Tracker Daily Driver, "The Flea"

Clicke HERE for Specs and Pics[/url]

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: Gears
« Reply #12 on: July 27, 2006, 05:56:40 AM »
Question 1: Check
Question 2: Check
Question 3: Check

Good News:
I starting to feel pretty smart on the subject.

Bad News:
Darn that figures the gears I need happen to be the hardest to find. 

I assume that I have a 10 bolt front member.  But changing those gears only helps in 4 wd. 
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2

*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: Gears
« Reply #13 on: July 27, 2006, 06:16:17 AM »

5. If I add lockers does this effect what gears are in my kick?


No
« Last Edit: July 27, 2006, 06:17:59 AM by LilRed »
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed

*

Offline fullsink18

  • 250
  • 0
  • Gender: Male
  • Wheel Me!
Re: Gears
« Reply #14 on: July 27, 2006, 06:28:54 AM »
Question 1: Check
Question 2: Check
Question 3: Check
Question 4: Check
Question 5: Check

Well I am pretty good to go now.  As soon as I get some money saved up I will put my name on boondocks waiting list for the 5.83 R&P.

Thanks a ton to a great group of intelligent people. 
94 2dr kick 8v
-     Full set of Calmini's skid plates, calmini header and full exhaust, k&n filter, sky idler arm, calmini idler arm brace and truss with stabalizer, lock-rite rear locker, Calmini 3"  BL, 2" Digger Spacers, Shrockworks bumper, chicago electric 8,000lb winch, 31" Grabber AT2, 15x7 2