Hello Guest
« previous next »
Pages: [1] 2   Go Down

2.5 and 2.7 liter oil pan compatibility?

  • 15 Replies
  • 2787 Views

0 Members and 7 Guests are viewing this topic.

*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
2.5 and 2.7 liter oil pan compatibility?
« on: March 30, 2006, 12:12:10 PM »
Anybody know off hand if the 2.7l and 2.5l oil pans are the same? 

The 2.7 motor I pulled has had its pan repaired in the past, looks like it was probably a careless jack handler's work.  While its out, figure I'll replace it.  Guess I could call a dealer.
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

95XL7

Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #1 on: March 30, 2006, 12:19:46 PM »
I believe there the same pan,the lower pan costs about $80
I found the following on suzukicarparts.com using their online parts finder.
 Description: OIL PAN
Part #: 11520-85F10
Price: $62.51
Categories: 
Collision > ENGINE > ENGINE
Mechanical > GROUP 4 - ENGINE > ENGINE OILING
 
« Last Edit: March 30, 2006, 12:29:54 PM by 95XL7 »
Logged
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #2 on: March 30, 2006, 12:46:20 PM »
Thanks!

Looked at suzukicarparts.com, thought they listed the lower pan for 180.  That concerned me.  Then you said 80.  That sounded better.  Called a dealer, parts guy quoted $56.  Told him to place the order.  Not cheap, but I wouldn't be able to sleep knowing that splotch of JB Weld was down there keeping everything in..
« Last Edit: March 30, 2006, 01:26:50 PM by beercheck »
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

95XL7

Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #3 on: March 30, 2006, 01:02:58 PM »
do you have any other parts left from the XL7?
Logged
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #4 on: March 30, 2006, 01:25:22 PM »
I still have EVERYTHING left, at the moment.  Reassembly hasn't quite begun yet..  I know I'll be taking engine/tranny/tc, shifter, stereo, wiring harnesses, front and rear axles/brakes/wheels, front (and perhaps rear, we'll see) springs, mirrors, parking brake lever, pedal assembly, under hood insulation, firewall insulation, under hood mercury light, exhaust.  I'll probably take the ABS equipment.  I might take some rear air components.

Does that leave anything you'd have interest in?  Seats, glass, air bags, steering, plus a bunch of displaced 2003 Tracker componentry, I guess.

Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

95XL7

Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #5 on: March 30, 2006, 01:54:27 PM »
 :o Nope.... was interested in the rear brake assemblies.
Logged
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #6 on: March 30, 2006, 02:01:42 PM »
So......I've got a line on a 5-sp from an XL-7 at a junkyard.  What would it take to use that instead of the auto?  I'm thinking it would just be the tranny, the ECM and the correct flywheel for the motor.  I would think the chassis wiring harness from the 5-sp Tracker should work.  Am I missing something major? 

I should probably just get back to work.  The last thing I need is to drag this project out any longer..
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

95XL7

Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #7 on: March 30, 2006, 02:07:19 PM »
I could use the rear emergency brake cables from the tracker rear end.
Logged
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #8 on: March 30, 2006, 02:11:34 PM »
I'll get to swapping the rear end (hey-oh!) in the next few days.  If I don't end up needing 'em for some reason, shouldn't be a prob.
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

95XL7

Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #9 on: March 30, 2006, 02:14:31 PM »
Thanks much! I bought a rear brake set-up from a GV and the ass...e's cut the brake cables.
I'm in the middle of swapping over the brakes and axles now.
Logged
*

Offline the_maplebar

  • 466
  • 0
  • Gender: Male
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #10 on: March 30, 2006, 02:24:41 PM »
I don't think so but just to make sure, does your 03 5spd 2.0L have the steel front diff and 3rd?
Logged
2002 4DR Tracker V6 ZR2.... 1.5"/2" coil spacers front/rear, BDS Strut Extensions, 235/75R15 Cooper STT... They ROCK!!!
http://www.zukiworld.com/forum/index.php?topic=35.msg111575#msg111575[/url]
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #11 on: March 30, 2006, 02:27:14 PM »
That would've been nice, huh?

But....nope.
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline cj

  • 1276
  • 0
  • I drive a really big ATV
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #12 on: March 30, 2006, 03:14:24 PM »
Quote from: beercheck on March 30, 2006, 02:01:42 PM
So......I've got a line on a 5-sp from an XL-7 at a junkyard.  What would it take to use that instead of the auto?  I'm thinking it would just be the tranny, the ECM and the correct flywheel for the motor.  I would think the chassis wiring harness from the 5-sp Tracker should work.  Am I missing something major? 

I should probably just get back to work.  The last thing I need is to drag this project out any longer..


If you ever think you will want to put some crawler gears in your transfer you can't do it with the manual or the 5spd auto.
Logged
*

Offline ebewley

  • 6554
  • 64
  • Gender: Male
  • ZUKIWORLD Online, Editor
    • ZUKIWORLD online
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #13 on: March 30, 2006, 04:14:35 PM »
Quote from: cj on March 30, 2006, 03:14:24 PM
Quote from: beercheck on March 30, 2006, 02:01:42 PM
So......I've got a line on a 5-sp from an XL-7 at a junkyard.  What would it take to use that instead of the auto?  I'm thinking it would just be the tranny, the ECM and the correct flywheel for the motor.  I would think the chassis wiring harness from the 5-sp Tracker should work.  Am I missing something major? 

I should probably just get back to work.  The last thing I need is to drag this project out any longer..



If you ever think you will want to put some crawler gears in your transfer you can't do it with the manual or the 5spd auto.

The auto won't work either. You need a GV automatic to run the Sidekick crawler gears in a GV or Sidekick t-case. GV automatic will bolt to and plug into XL.7 engine. That is what I have in my Sidekick. XL.7 2.7 engine/GV auto 4-speed transmission/Sidekick T-case with Calmini crawler gears - no mods or adapters needed.

-Eric
Logged
Eric L. Bewley                               
Editor, ZUKIWORLD Online                   

Suzuki 4x4 Owners Association - Please Join  The ZUKIWORLD ORDER Today!
About ZUKIWORLD Online: We are an enthusiast web site dedicated to the promotion of the Suzuki Automobile as the best and most capable vehicle on the planet. We offer product reviews, Tech tips, DIY, Travel and Adventure, Forum, Technical information, Life Style, and so much more!
*

Offline cj

  • 1276
  • 0
  • I drive a really big ATV
Re: 2.5 and 2.7 liter oil pan compatibility?
« Reply #14 on: March 30, 2006, 04:29:40 PM »
Hmm... so the XL-7 4spd autos can't take the gears either. Living and learning  :)
Logged
Pages: [1] 2   Go Up
« previous next »