Hello All,
Here's some pics to look at.As you can see the rear body mounts are gone...I was installing my body lift and desided to fab up so new mounts.Instead of using the lift block,I used 2" tubing welded to the body because I had to replace it all anyway.After it was welded up..Put the fiberglass mesh and resin on to seal it up.Now have to do the other side...Look at how much clearance I got..Those are stock 205's but I know I can get 31's under it.It has 2"body and Sky 1.5" spring spacers.I'm going to be bad..I found out how to make pics small!!!Now I can post them......
Later Tom K