Hey guys, Im looking into adding power steering to my 93 tracker. I think i've figured out everything I will need (P/S Pump & Bracket, Fluid Resivior/Lines, Steering Box). However, does anybody know if my current steering shaft is the same as the power steering one? will it work or do i need a different one? Is there anything else that I am missing that I am going to need?

Thanks in advance 

Steering shaft is different as well as the pitman arm.

Steering shaft is different as well as the pitman arm.

Would you happen to know where I could get one by chance? Nobody around here has them and dealers say that the shafts are "discontinued" 

Call Hawk Stirctly Suzuki at 1-888-SAMURAI. They will have all the parts you need and even make sure you are not overlooking something. When I was doing mine I was including an AC compressor to do on board air later and they pointed out that I had the worng brackets for my compressor (they came with two different compressors, who knew  )

Zig

Call Hawk Stirctly Suzuki at 1-888-SAMURAI. They will have all the parts you need and even make sure you are not overlooking something. When I was doing mine I was including an AC compressor to do on board air later and they pointed out that I had the worng brackets for my compressor (they came with two different compressors, who knew  )

Zig

Thank you!

I just put power steering in my rig and i didnt need to change the pitman.But you do need the steering shaft.Pretty easy add on and a must if you got bigger tires.

I just put power steering in my rig and i didnt need to change the pitman.But you do need the steering shaft.Pretty easy add on and a must if you got bigger tires.

That's right, if you have big tires and no power steering, you'll end up looking like me:

Big tires - Power Steering = Big arms
You can also add a locker into that equation and then it just equals broken fingers from the steering wheel flying back to a straight position. 

Amilla

Thanks for the replies. I called up Hawk friday evening and he did verify that i needed a new shaft...$45 and he has a few in stock. Atleast now I know where I can get one when I need it 

I can stand it right now without power steering, but I know once I do what I want to do with this rig, I'll wish I had it...so I figure I would just take care of it now and have it done 

Thanks again!