Hello Guest

Will not start and I am stumped.....FIXED!!!!

  • 35 Replies
  • 7615 Views

0 Members and 4 Guests are viewing this topic.

*

Offline hwyman

  • 175
  • 1
  • Gender: Male
Re: Will not start and I am stumped
« Reply #30 on: June 07, 2016, 06:05:32 AM »
No unfortunately they are 20 miles apart.  I can use a multimeter so it is just a matter of time to chase the wires. 
1994 Geo Tracker  2dr 4wd 1.6l 8v Manual Trans

*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: Will not start and I am stumped
« Reply #31 on: June 07, 2016, 12:59:41 PM »
Write down what you have on each pin on the good one.   Should help narrow down the problem.  I still think a main feed is missing.
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!

*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: Will not start and I am stumped
« Reply #32 on: June 08, 2016, 02:39:13 PM »
I think this will help.
« Last Edit: June 08, 2016, 02:41:36 PM by BRD HNTR »
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.

*

Offline hwyman

  • 175
  • 1
  • Gender: Male
Re: Will not start and I am stumped.....FIXED!!!!
« Reply #33 on: June 27, 2016, 06:13:22 AM »
Thanks to the wiring diagrams and standing on my head under the dash I was able to find the bad wire and fix it. 

Thanks everyone for the help

Travis
1994 Geo Tracker  2dr 4wd 1.6l 8v Manual Trans

*

Offline El Gato Diablo

  • 14
  • 0
  • ZUKIWORLD Online!
Re: Will not start and I am stumped.....FIXED!!!!
« Reply #34 on: June 30, 2016, 07:30:16 PM »
Bet that feels pretty good.  So shorted wire was the culprit or loose connection?

*

Offline hwyman

  • 175
  • 1
  • Gender: Male
Re: Will not start and I am stumped.....FIXED!!!!
« Reply #35 on: July 01, 2016, 04:54:22 AM »
Loose wire in the connector to the ecm. 
1994 Geo Tracker  2dr 4wd 1.6l 8v Manual Trans