Hello Guest

Convert Japanese wiring to American trailer harness

  • 4 Replies
  • 3466 Views

0 Members and 4 Guests are viewing this topic.

Convert Japanese wiring to American trailer harness
« on: October 31, 2015, 01:30:20 PM »
Trying to set up my Sidekick to tow a small utility trailer.  U-Haul installed the wiring, plug etc. when they installed the hitch.  Basic 4 wire set up.  BUT it doesn't work and a local electrician( here in Mexico) tells me I need some sort of converter to change the Japanese wiring on my car to American wiring on the trailer.
Does anyone know what the heck he's talking about?

*

Offline kreator

  • 634
  • 15
  • Gender: Male
Re: Convert Japanese wiring to American trailer harness
« Reply #1 on: October 31, 2015, 02:55:07 PM »
yes its a converter that changes the 5/6 wire system that the Suki has to a 3/4 wire system you have to install the converter so it take your rig which has separate turn and brake light  to turn and brake lite are the same which a standard trailer has . the  auto parts store should have them. 
BOB | www.KreationFab.com | 503-689-1377

Re: Convert Japanese wiring to American trailer harness
« Reply #2 on: November 01, 2015, 08:45:14 AM »
Appreciated!  Do I just ask for a converter to adapter my Suzuki to an American trailer connector?

*

Offline kreator

  • 634
  • 15
  • Gender: Male
Re: Convert Japanese wiring to American trailer harness
« Reply #3 on: November 01, 2015, 09:46:31 AM »
Yes just ask for the turn signal converter for trailer lights
BOB | www.KreationFab.com | 503-689-1377

*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: Convert Japanese wiring to American trailer harness
« Reply #4 on: November 03, 2015, 07:20:32 PM »
Amazon, J C Whitney, Ebay, all have then average $23 for the plug and play kit.  Just look for SuZUKI TRAILER WIRING KIT.  Behind the left tail light the plug for trailer wiring is taped to the wiring leading to the tail lights.  I just installed it in my 93 Tracker (using Sidekick kit), and found the wiring plug about 14" further up the tail light wiring loom.  No soldering, crimping, or electrical tape needed.
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.