I bought a 1991 tracker Lsi model, and liked the trim package on the inside, so i decided to transfer it all to my 1994 tracker base, here is some of the pics of the process...

The Two trackers ready for the transfer...



These are the side, pillar, and door frame panels...



These are panels from the 94 rear seat belt pillar, rear side panels...



Center pillar before...



Front before...



My son taking out the rear bench seat..from 94...



Taking side panels from 94...



Rear side before....



Rear side before...



HMMM little rust, I cleaned it up, used a grinder untill i had clean bare metal, used rust converter and painted,,



Rear before...



Had to take a break to put fish on to smoke... YUMMMM



Passenger side mostly done...



Center...



Rear almost done....



*^%*&%*&  I broke radio bezel when i took it out.....



Cleaned and used permatex plastic weld, also put tooth picks on each side to give some extra strength...



Dash all done...



Rear bucket seats replaced original rear bench...bolts were there just had to cut carpet to access..




Have more to do, I am taking the rear bench out,, still have the vinyl to paint on the front seats, drivers door panel, and center console panels and a bunch of other little things......to be continued....