Hello Guest
« previous next »
Pages: [1]   Go Down

POWER STEERING PROBLEM

  • 3 Replies
  • 997 Views

0 Members and 3 Guests are viewing this topic.

*

Offline Wildman

  • 30
  • 0
POWER STEERING PROBLEM
« on: September 29, 2012, 06:57:27 PM »
I have a 1.6 8V tracker engine in my 88 Samurai. I assume it has the stock 1.6 pump and bracket. My problem is the pump is to close to the steering shaft and has rubbed a hole into the supply line. The pulley is about 1/16" from the steering shaft spline where it clamps onto the steering box.  Is there an easy fix for this or do I just need to fabricate a new bracket that relocates the pump above the steering shaft.

Wade
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: POWER STEERING PROBLEM
« Reply #1 on: September 29, 2012, 08:34:00 PM »
On mine I put another stock bracket above the other bracket it bolted to the block and then I welded the two together for a little added strength it was to be a temp kind of thing that was ten years ago.lol
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline Wildman

  • 30
  • 0
Re: POWER STEERING PROBLEM
« Reply #2 on: September 30, 2012, 05:00:52 AM »
Yea,  I could see how that would work.  I will try to fab a whole to bracket later today and see how that works out.

Thanks for yout input and help

Wade
Logged
*

Offline Skyhiranger

  • 3734
  • 122
  • I don't buy, what I can build
Re: POWER STEERING PROBLEM
« Reply #3 on: September 30, 2012, 07:01:17 AM »
Most people move the pump up (move the bracket up on the block).
Logged
Tracker and Sidekick parts for sale.....PM me with your wants/needs.
Pages: [1]   Go Up
« previous next »