Hello Guest

3 inch Calmini Body lift, 2 Inch BDS Spring Lift  

  • 21 Replies
  • 7278 Views

0 Members and 1 Guest are viewing this topic.

*

Offline safarikick

  • 270
  • 0
  • Gender: Male
  • nor-cal rhinos
    • http://www.cardomain.com/id/safarikick
Re: 3 inch Calmini Body lift, 2 Inch BDS Spring Li
« Reply #15 on: April 07, 2004, 04:48:00 PM »
the bds lift is right around 500 dollars and you get springs all the way around, struts for the front, shocks for the rear and it takes about 2 hours to install.







the diamond plate and skid plate was a freebie that i made. made out of 3/16 alumini diamond plate.



3+3 calmini 5.12 a lock in the back and front with steel front diff. 4.24 in tc

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: 3 inch Calmini Body lift, 2 Inch BDS Spring Li
« Reply #16 on: April 07, 2004, 04:59:36 PM »
thanks dude

my lug nuts require more torque then my engine makes ;)

*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Re: 3 inch Calmini Body lift, 2 Inch BDS Spring Li
« Reply #17 on: April 07, 2004, 10:15:19 PM »
Quote
LOOKS GREAT  ;D   ONE QUESTION THOUGH  ???  WHATS THAT THING TO THE RIGHT  ???      ;D  MATTY D. 8)


;D
Zukipilot
'92 Liberty Overland Sidekick

*

Offline lil_Truck

  • 1148
  • 0
  • Gender: Male
  • Eric Gardner
Re: 3 inch Calmini Body lift, 2 Inch BDS Spring Li
« Reply #18 on: April 08, 2004, 03:13:37 AM »
Nice ride!

Free diamond plate is a good thing!!

BUT, I'm with 1bigtracker.  You put that diamond plate on a big rock and you most likely won't slide over it.  Even smooth alum. can be bad.  It's soft and a good rock can goug it and hold you solid.

I've seen rigs where all it needed was the slighted push with one hand to help it along.  Also watched a friend push a lock Sami on 33" back into a mud hole all by him self (with only his hands and feet).

So, some times it's the littlest stuff that makes the difference.
e-mail: liltruck|removethispart|@comcast.net
96 Tracker
6" Calimini Lift with custom Frame
32 MTR's Warn 8000i
Front/Rear ARB's Many New Mods soon.

*

Offline chrisvitarasport94

  • 228
  • 0
  • Gender: Male
Re: 3 inch Calmini Body lift, 2 Inch BDS Spring Li
« Reply #19 on: April 08, 2004, 05:41:39 AM »
lookin good!
'94 3dr s/top Sport, roof bars, roof lights, Calmini bumper, SuperwinchEP9, CB & handheld, GPS, 2" body lift, skid plates, 2.5" susp lift, & hi-lift. Safari Snorkel. R Lockright

*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: 3 inch Calmini Body lift, 2 Inch BDS Spring Li
« Reply #20 on: April 08, 2004, 07:52:18 AM »
Quote
Nice ride!

Free diamond plate is a good thing!!

BUT, I'm with 1bigtracker.  You put that diamond plate on a big rock and you most likely won't slide over it.  Even smooth alum. can be bad.  It's soft and a good rock can goug it and hold you solid.

I've seen rigs where all it needed was the slighted push with one hand to help it along.  Also watched a friend push a lock Sami on 33" back into a mud hole all by him self (with only his hands and feet).

So, some times it's the littlest stuff that makes the difference.

and i thought i was the only one.  i kinda feel better about it now.

stu
   

*

Offline NY_SIDEKICKER

  • 2274
  • 0
  • Gender: Male
  • YOU WANNA RACE THE ZUKE !
    • OBSESSIVE BEHAVIOR !
Re: 3 inch Calmini Body lift, 2 Inch BDS Spring Li
« Reply #21 on: April 08, 2004, 12:43:14 PM »
Quote
the thing on the right is safarikicks's wifes 2003 jeep and i suggest you say nothing more or you will have a big problem on your hands. unless of course you have something nice to say about it. safarikick's wife!


;D  ;D A TYPICAL JEEP OWNER FULL OF SPUNK  ;D  ;D HMMMM SOMETHING NICE TO SAY ............I LIKE THE COLOR  ;) OTHER THAN THAT  :-X   I CANT AFFORD ANY MORE BIG PROBLEMS  ::)  P.S. MY JEEP PICS. ARE TO PI$$ OFF MY BRO THE HEEP LOVER IN THE FAMILY ...I CANT SEEM TO SAVE HIM  :P ..... MATTY D.   8)