Thanks. I've, decided to go with a 1.6 8V and a 1976 Corolla 2TC carb until I can afford the TBI.
Can you tell me if the procedure is the same for 2TC (1600cc) carb as the 1200 carb on your site?
Also, I have started a 1.6L 8V swap how to thread, I would raelly appreciate your input.
Unfortunately, I am often confused for some sort of ASE-Certified mechanic with 35 years of shop experience.
Nothing could be further from the truth.
I am simply a gatherer of information.
That said, I DID do my own 1.6 transplant. I used the Calmini Adapter kit and installed a Weber DGAV 32/36 at the same time. Since I had already done a SPOA, I didn't have any problems with the oilpan.
About all I can suggest is that you grab a copy of Dice's '88 Samurai Wiring Diagram - ECM deleted - (in color!) at Ack's FAQ and take a good look at the Toyota Carb article - also at Ack's FAQ. Both should give you some ideas on how to adapt the 2tc carb.
A search for
2TC at this site along with one at ZukiKrawlers.com and Zuwharrie.com might turn up some more information.
I hope that this helps!