Hello Guest

4dr spring on 2dr

  • 3 Replies
  • 1142 Views

0 Members and 1 Guest are viewing this topic.

*

Offline airdale navy

  • *
  • 82
  • 2
  • Gender: Male
4dr spring on 2dr
« on: March 26, 2012, 06:38:21 PM »
How much lift can you get by putting 4dr spring in a 2dr (sidekick)?And does it ride better than a suspension a lift.
91 sidekick,8v,sky 1.5 lift,235 tires,full synthetic oils !GM alternator upgrade.Ford Mustang coil.4DR front brakes.

*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: 4dr spring on 2dr
« Reply #1 on: March 26, 2012, 11:49:39 PM »
You get between 1 inch to 1 1/2 inches, depending on the condition of both springs.  Seems like it is more noticeable on front.  The ride is better than spacers.  If you want more lift, there is Ford ranger springs for front, and Honda springs for the rear.
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.

*

Offline airdale navy

  • *
  • 82
  • 2
  • Gender: Male
Re: 4dr spring on 2dr
« Reply #2 on: March 27, 2012, 02:26:31 PM »
honda springs !Tell me more!
91 sidekick,8v,sky 1.5 lift,235 tires,full synthetic oils !GM alternator upgrade.Ford Mustang coil.4DR front brakes.

*

Offline tuxblacray

  • 930
  • 20
  • Gender: Male
  • Building a Bigger Better Brute Samurai.... B-}
    • Tuxblacray Photos
Re: 4dr spring on 2dr
« Reply #3 on: March 31, 2012, 05:54:31 AM »

Just a word of caution with doing this.. there is a point where the CV joints tend to pull / blow out at flex. I am thinking this is somewhere in the 3-3.5" + range.

I used 2" spacers with 4 door springs for about 3-3.5" of lift. Although I had no problems it was mainly due to not wheeling it. (I sold it before having a chance to wheel it.)

You will also need to adjust your camber accordingly once the install is complete.
I know the voices aren't real.... but they have some pretty kewl ideas!!! Tux.....  ;-)
I get my Sammi parts here, and you can too... http://www.mikodaindustries.com/http://stores.ebay.com/sticksnstones4x4samuraiparts