Hello Guest

samurai tranny

  • 2 Replies
  • 1580 Views

0 Members and 1 Guest are viewing this topic.

*

Offline lee183

  • 9
  • 0
samurai tranny
« on: October 09, 2011, 03:00:53 PM »
i have a 86 samurai everything stock.
i took the engine out with the transmission took the transmission off rebuilt it an when i put it together again i checked the shifting and everything worked then i put it back on the engine and checked the shifting again it shifted easy so i out it all back in the samurai and attached everything back up the next day i came out an checked the shifting and she would not shift now there is no gear fluid in it or a shifter sheet but it was shifting with out them when i checked them before so im confused why it wouldn't shift before.
thanks.

*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: samurai tranny
« Reply #1 on: October 09, 2011, 06:05:35 PM »
put the shifter sheet in, it will be fine
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.

*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: samurai tranny
« Reply #2 on: October 09, 2011, 07:30:56 PM »
do not run the engine with a dry transmission either.
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.