Jeff's 2" spacers and 31's

I am really interested in purchasing this lift....where can I get it at and how much is it?

Search for Ebay ID: hoepkers. or try http://www.ebay.ca/itm/2-COIL-LIFT-KIT-98-OLDER-SUZUKI-SIDEKICK-GEO-TRACKER-/280752005988?pt=Motors_Car_Truck_Parts_Accessories&hash=item415e1fa364#ht_2728wt_1274
 I just got them for my 90 tracker and liked them a lot too.  I am on 235/75 r15 tires.

Nice write up ! plan on ordering a set for my 2000 tracker this weekend !

canadiantbone you should look at mudchild's kit. it is more expensive but has everything you need and is made out of aluminium and steel. I put one in my 2001 tracker last weekend and it went in good and looks awesome.

canadiantbone you should look at mudchild's kit. it is more expensive but has everything you need and is made out of aluminium and steel. I put one in my 2001 tracker last weekend and it went in good and looks awesome.

will do , thanks for the info

Any competent real welder can weld cast. I've welded lots of cast manifolds before.  clean the joint well preheat area to be welded and i normally use lincon Ferroweld 1/8 rod weld it up let it cool natrually never had one come back yet.

Any competent real welder can weld cast. I've welded lots of cast manifolds before.  clean the joint well preheat area to be welded and i normally use lincon Ferroweld 1/8 rod weld it up let it cool natrually never had one come back yet.

Bingo!

The problem most people have welding cast parts is improper preperation and not preheating the cast part enough prior to welding. I have seen several sammi cast thirds with mounting arms welded on for use in sidekicks and they have faired very well and there is far more torque applied there than on the mani.