Have a busted crank I need to replace.  It is an 8 valve g16a motor.  Crank has 6 bolt holes not the eight.

MAN , I WAS HOPING FOR A BETTER RESPONCE, I NEED ONE ALSO

I FOUND NEW , YOU BETER BE SITTING DOWN $802 IN MICH

A 94 with 8v?
I have a 16v crank.

How much ?

I have a 1.6 8v out of a '90 sidekick.

75 for the short block. It's a 1994 model 16v

Jluck

Yeah, my 94 tracker is an 8 valve tbi model made in canada.  I assumed though that the mfi would be the same for the same year.  Bottom end should be the same though right?  MY block is stamped G16A.

Kreator

Autozone has one for 460 and special ordered.  still looking for more options there.  they are hard to find aren't they.

only $215 new from Rockauto.com not sure if its a 8 or 16v, listed for a 94. This place is the best for parts!

Good luck. 

Erik in Portland

oops thats for a Sidekick, the 94 tracker is listed as 8 bolt and only $180. 6 bolt not listed..

Yep, mine is the 6 bolt of course!

Jluck

Yeah, my 94 tracker is an 8 valve tbi model made in canada.  I assumed though that the mfi would be the same for the same year.  Bottom end should be the same though right?  MY block is stamped G16A.

Kreator

Autozone has one for 460 and special ordered.  still looking for more options there.  they are hard to find aren't they.

I dont remember all the engine interchange or numerical coding (never kept zuki power long) but I'm sure its on here a bunch.
and I do think it's a 6 bolt
anyways its 75 bones if it will work for ya

IS THE  FLYWHEEL THE ONLY CHANGE FROM 6 BOLT TO 8 BOLT, I TALKED TO RPM YESTERDAY AND THEY 3 LISTED ON THE WEST COAST FOR $412 AND HE SAID THEY WHERE SAME

I know this is an old post but....
what is this "6 bolt" "8 bolt" stuff you guys keep talking about?  All 1.6 trackick engines had cranks with 6 bolts that hold the flywheel/flexplate to the crank.  If any site lists anything different (for the 1.6 engine) it is wrong.