Hello Guest

Engine bay oil slick!!

  • 4 Replies
  • 1209 Views

0 Members and 5 Guests are viewing this topic.

*

Offline Soupy

  • 206
  • 2
Engine bay oil slick!!
« on: April 10, 2011, 09:31:27 AM »
I'm going to pick up new to me sidekick today. Yay! I noticed the oil was a bit low and the top of the transmission is covered in more oil than the oil slick in the gulf coast.

What gaskets could i replace to shore up the gusher?  Is there anyone out there that sells some sort of complete top end gasket set to cover all the leaky oily places?

*

Offline fordguy79

  • 494
  • 8
  • Gender: Male
  • long beach Wa,
Re: Engine bay oil slick!!
« Reply #1 on: April 10, 2011, 10:31:56 AM »
depends on then year and what motor you have  i would start with distributor o-rings guessing it is a pre 96 1.6
87sami 32" bfg mt 6.5:1 w/reverse S shifter  1.6 16v sold and missed

*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Engine bay oil slick!!
« Reply #2 on: April 10, 2011, 10:51:28 AM »
The distributor drive is a common leak point, as is the rear of the
valve cover on the 8V engine, so get some replacements and ask
for a reduced price if you can  ;)

Wild
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.

Re: Engine bay oil slick!!
« Reply #3 on: April 10, 2011, 06:39:35 PM »
when my dist. gasket went out some oil fell onto the clutch, through the bell housing and it wouldnt bite.

*

Offline lv2fsh

  • 312
  • 19
Re: Engine bay oil slick!!
« Reply #4 on: April 11, 2011, 07:00:53 AM »
Longshot but I've had the breather from the valve cover get plugged causing excess pressure and oil leaked every where.