Hello Guest
« previous next »
Pages: [1]   Go Down

Setting the timeing on a 1.6l

  • 3 Replies
  • 1291 Views

0 Members and 1 Guest are viewing this topic.

*

Offline rodmax

  • 4
  • 0
Setting the timeing on a 1.6l
« on: January 21, 2011, 03:30:05 PM »
I am changing the motor and have to use my orriginal distributor and I did not mark of check anything when I took it out...
so how do I set the timeing when I put the distributor on the motor. it is a 1997 1.6l 16v .. the motor I am putting in is out of a 1996 1.6 16v. I am useing all of my intake from the 97. Any other surprises I might run into???

Thanks,Rodney.
Logged
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Setting the timeing on a 1.6l
« Reply #1 on: January 22, 2011, 05:13:06 AM »
If you don't have a service manual, you may want to get one, or take a good look at ACKS FACS, and follow the procedures closley. It's pretty detailed and too long to go step by step here, and I couldn't recite it by memory anyway, but I did the same thing once when I first got my Tracker and it seemed like I'd never get it right, until I followed all the steps.
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline onyx

  • 10
  • 0
Re: Setting the timeing on a 1.6l
« Reply #2 on: January 22, 2011, 12:10:27 PM »
I just finished one and you had better be careful to do it right !!  Go to kick-fix.com this is an excellent site and will walk you thru it right the first time
Logged
*

Offline rodmax

  • 4
  • 0
Re: Setting the timeing on a 1.6l
« Reply #3 on: February 01, 2011, 05:27:53 PM »
 Thanks for the help, Got it done today and followed the instructions step by step and she fired right up!!! Thanks again!!
Logged
Pages: [1]   Go Up
« previous next »