Hello Guest

REAR DIFF SPACER BOLT SIZE?

  • 3 Replies
  • 1380 Views

0 Members and 1 Guest are viewing this topic.

*

Offline BARLEY

  • 58
  • 0
  • Gender: Male
  • No One Lives Forever...
REAR DIFF SPACER BOLT SIZE?
« on: December 01, 2010, 06:15:52 AM »
Can someone please tell me what size bolts are needed to put in the rear diff spacer for a 2'' coil suspension lift? it's jeff's coil spacer lift and it doesnt come with those bolts for the rear diff spacer so I need to know that size! thanks Barley

*

Offline MUD CHILD

  • 355
  • 9
Re: REAR DIFF SPACER BOLT SIZE?
« Reply #1 on: December 01, 2010, 08:48:40 AM »
NO DITCH TO DEEP NO HILL TO STEEP

http://srcustoms.ca/

*

Offline rascott

  • 669
  • 15
  • Gender: Male
  • tread lightly monkeywrench a little
Re: REAR DIFF SPACER BOLT SIZE?
« Reply #2 on: December 01, 2010, 07:36:41 PM »
they are 10x1.25 bolts.
i used some 3"(don't know mm length) bolts. 3 1/4" would be better, and i intend to relace them.
'89 kick w/little motor, still got pieces of jeff's pucks, stan's sticks into 4.24:1 tcase, 31x10.5x15's, rear lockrite, kick power steering, some radios(kj6esv), bmw seat, other changes just because. done on the cheap.
suzi the psychic gets me fishing.

*

Offline rascott

  • 669
  • 15
  • Gender: Male
  • tread lightly monkeywrench a little
Re: REAR DIFF SPACER BOLT SIZE?
« Reply #3 on: December 02, 2010, 05:16:23 PM »
they are 10x1.25 bolts.
i used some 3"(don't know mm length) bolts. 3 1/4" would be better, and i intend to relace them.


i couldn't find longer bolts locally.
3" = about 78mm. i figure 90mm will be ok. i had to order them.

update-
80mm would be better.
these 90mm are too long for one blind hole. had to do a washer stack.........
« Last Edit: December 06, 2010, 10:12:09 PM by rascott »
'89 kick w/little motor, still got pieces of jeff's pucks, stan's sticks into 4.24:1 tcase, 31x10.5x15's, rear lockrite, kick power steering, some radios(kj6esv), bmw seat, other changes just because. done on the cheap.
suzi the psychic gets me fishing.