Hello Guest

WTB: 1.6L 16V or 8V engine

  • 3 Replies
  • 1910 Views

0 Members and 1 Guest are viewing this topic.

*

Offline erik the red

  • 174
  • 0
  • Gender: Male
    • Cascade Adventure Guides
WTB: 1.6L 16V or 8V engine
« on: July 11, 2010, 03:02:28 PM »
Looking for a 16V or 8V engine for a Sami swap. Preferably lower than 150K miles. Located in Everett, WA so if the engine isn't local, please let me know shipping costs. Thanks for looking.
1996 Geo Tracker
1987 Suzuki Samurai soft top
1987 Suzuki Samurai Tin Top
1972 Suzuki LJ20V

*

Offline krittergitter

  • 114
  • 1
  • Gender: Male
Re: WTB: 1.6L 16V or 8V engine
« Reply #1 on: July 16, 2010, 02:02:37 PM »
i have a 16V in eugene oregon  $650.   pick up only sorry   541 915 4748

*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: WTB: 1.6L 16V or 8V engine
« Reply #2 on: July 20, 2010, 01:39:38 AM »
Send a message to BRD HNTR.  There is a rolled tracker behind his house that has a running 1.6L 8 valve in it.  :)
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing

*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: WTB: 1.6L 16V or 8V engine
« Reply #3 on: July 20, 2010, 01:20:55 PM »
We have a 92 1.6 8V with around 150K on it.  Motor ran good but car was rolled, checking compression (with lots of top end oil because it set upside down for 1/2 hour) showed #2 cylinder low. 
  I just did the compression check, lots of oil from sitting on its lid for a while, #1 - 210, #2 - 70, #3 - 300+, #4 - 280. 


$450 obo for whole car with title, or I can pull the motor for you same price.

This will give you the wiring, motor, transfer case (for doubling on the samurai), and larger radiator.

Bow, Wa. come up and hear it run.
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.