that looks great dude!  what wattage are they?

Looks good!  Where do you run it that you need the extra lighting? 

do i need it? no. i just thought it would be nice to have when i go night wheeling sometimes . they are 100 watt i think. so...in between the switch and the battery there is a fuse. and when i turn on both switches (i have one switch for the middle two and one switch for the outside two) the fuse for the inside two burns out.... i don't know what im doing wrong could someone help me out here. thanks

Figured out what was wrong and tested out these lights tonight i love em!!! I love the look of them and they sure are nice for night wheelin

Nice rig! It looks like it will get around really good! who are the tires made by?
thanks,
KJ

they are 235 gt radial,adventuro mt's. it actually amazes me how far this little thing will go. and with the welded diff it goes twice as far as it did with open diff!

so today i bought coils from a door kick. they don't look a whole lot bigger beside the 2 dr coils. but it gave me 1 1/4 of lift in the back.  i haven't put the front ones in yet. my front cv's are at some pretty serious angles.i think im gunna lower the front diff before i put the front 4 dr coils in. does anybody have pictures of there front diff lowered and the mounts they made/used?

with my locked front end i kept breaking cv joints. here's some pics of the 2 inch diff drop we did. first we cut the crossmember where the rear of the diff bolts to out.

then we welded flat metal onto the side of the cut out crossmember. hammered it in annd lined everything up...

That looks really good man!

then we welded flat metal onto the side of the cut out crossmember. hammered it in annd lined everything up...

I did pretty much same thing, did not drop enough the first time so replaced most of cross member with 1/2" plate.

How much was your drop? 
A skid plate helps.