Hello Guest

North American Vendor~diff drop brackets~

  • 3 Replies
  • 1571 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Canazuk

  • 19
  • 0
North American Vendor~diff drop brackets~
« on: June 29, 2010, 07:29:37 PM »
Hey All

I am looking for diff drop brackets for my 99 4 door tracker, as far as it goes Calmini are the only guys that build a set and they don't sell them out of the kit. Bits for vits sells them in the UK and GIZ in Asia http://giz4x4.en.ecplaza.net/20.asp Does any know of a North American supplier or better yet Blue Prints or measurements? Also does any know if the 89 to 98 will fit the next Gen? if that's the case I can get a set from Zukination, also some company's sell 2 pc were others sell 3? is the one on the lower cross member needed, these diff's are know for breaking
« Last Edit: June 29, 2010, 07:33:55 PM by Canazuk »

*

Offline bzzr2

  • 1011
  • 3
Re: North American Vendor~diff drop brackets~
« Reply #1 on: July 09, 2010, 10:25:48 AM »
get from bits 4 vits, the older brackets don't match up.
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4

*

Offline Canazuk

  • 19
  • 0
Re: North American Vendor~diff drop brackets~
« Reply #2 on: July 09, 2010, 11:01:24 PM »
do bits4vits have the new body ones?

*

Offline IanL

  • 466
  • 5
  • Gender: Male
  • You know the answer - DIY :-)
Re: North American Vendor~diff drop brackets~
« Reply #3 on: July 10, 2010, 12:41:10 AM »
No, I think not.  He calls them Front Axle Drop Brackets, lists them for the Vitara (which means 1st Gen in Europe) and states they will not fit the V6 model (which you don't have in North America; you have the Sport with the 1.8 ).  He doesn't list them for the GV (which means 2nd Gen in Europe).

But email him; he always replies:  shop|removethispart|@bits4vits.co.uk
« Last Edit: July 10, 2010, 12:44:23 AM by IanL »
'98 GV V6, '96 X-90 with RRO 2.5" lift and 195/80 R15, '93 Cappuccino.