Hello Guest
« previous next »
Pages: [1]   Go Down

Control Arms

  • 4 Replies
  • 2608 Views

0 Members and 1 Guest are viewing this topic.

*

Offline tukko

  • 22
  • 1
  • Gender: Male
Control Arms
« on: February 09, 2010, 01:46:56 AM »
Hello all, I know it's done before. But I'm happy with the result so i want you all to know about it  :) :) :)
Next step powdercoat and new bushings. Men what are those things expensive  :(
I thought they were cheaper in the us then in Holland but no.

Thanks again mike for the afford  :)
Logged
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Control Arms
« Reply #1 on: February 09, 2010, 03:42:59 AM »
Your welcome Bud! Nice work!
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline BRD HNTR

  • 2300
  • 56
  • Gender: Male
Re: Control Arms
« Reply #2 on: February 09, 2010, 01:17:57 PM »
I raised my spring pads (on one side), so as to get some lift as well as straightening the springs.

Logged
93 Tracker,XL7 springs & 1" raised spring pads in front with YJ springs in back, home built bumpers rear & front (w/winch), 2" x 4" rock tubes,  ARB front & rear, converted Sami rear to IFS, 33x12.5x15  aluminum rims, roll cage, 2.7L w/5 speed auto.
*

Offline tukko

  • 22
  • 1
  • Gender: Male
Re: Control Arms
« Reply #3 on: February 09, 2010, 02:29:47 PM »
Very nice job.

I've been thinking to do that as well but in Holland it's not allowed to weld on controlarms.
So i hope they wont notice it the way i did it the next inspection.
Logged
*

Offline tukko

  • 22
  • 1
  • Gender: Male
Re: Control Arms
« Reply #4 on: March 01, 2010, 08:02:34 AM »
Well, the control arms are installed. I'm happy with the result. Nice straight springs. No fading any more.  I needed only 1 spacer to level it up. (less then a inch) :) The control arms are painted with a 1K coating.
Logged
Pages: [1]   Go Up
« previous next »