Hello Guest

rocker screws?

  • 7 Replies
  • 2772 Views

0 Members and 6 Guests are viewing this topic.

*

Offline fordguy79

  • 494
  • 8
  • Gender: Male
  • long beach Wa,
rocker screws?
« on: November 08, 2009, 03:24:49 PM »
took off my valve cover for the first time and some of the screws that hold the rockers down r missing       so can some one help with the size   thread   and length            87 samurai 1.3
87sami 32" bfg mt 6.5:1 w/reverse S shifter  1.6 16v sold and missed

Re: rocker screws?
« Reply #1 on: November 09, 2009, 04:51:08 PM »
I looked at mine to see if I was missing any screws, all there: but one is a cap screw.  Not a tapered head.  Will this screw up my rocker?

*

Offline ebewley

  • 6548
  • 64
  • Gender: Male
  • ZUKIWORLD Online, Editor
    • ZUKIWORLD online
Re: rocker screws?
« Reply #2 on: November 10, 2009, 07:34:19 AM »
It is common for those screws to be loose on engines with some miles on them. I've even found them in the oil pan before! A bit of medium locktite and an impact driver to tap them in just a bit tighter than you can do with a screw driver and they'll be fine. To get replacements, Call Hawk.

Good luck, Eric
Eric L. Bewley                               
Editor, ZUKIWORLD Online                   

Suzuki 4x4 Owners Association - Please Join  The ZUKIWORLD ORDER Today!
About ZUKIWORLD Online: We are an enthusiast web site dedicated to the promotion of the Suzuki Automobile as the best and most capable vehicle on the planet. We offer product reviews, Tech tips, DIY, Travel and Adventure, Forum, Technical information, Life Style, and so much more!

*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: rocker screws?
« Reply #3 on: November 12, 2009, 03:17:55 PM »
On the later models the factorys started staking those bolts.
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org

Re: rocker screws?
« Reply #4 on: November 13, 2009, 05:29:34 AM »
Thank You for that tidbit of info.

*

Offline fordguy79

  • 494
  • 8
  • Gender: Male
  • long beach Wa,
Re: rocker screws?
« Reply #5 on: November 13, 2009, 03:44:49 PM »
i was looking for the size and thread pitch hawks  would not say they want me to buy some from them
87sami 32" bfg mt 6.5:1 w/reverse S shifter  1.6 16v sold and missed

*

Offline ebewley

  • 6548
  • 64
  • Gender: Male
  • ZUKIWORLD Online, Editor
    • ZUKIWORLD online
Re: rocker screws?
« Reply #6 on: November 16, 2009, 07:56:17 AM »
i was looking for the size and thread pitch hawks  would not say they want me to buy some from them

How much are they asking for those screw/bolts?

-Eric
Eric L. Bewley                               
Editor, ZUKIWORLD Online                   

Suzuki 4x4 Owners Association - Please Join  The ZUKIWORLD ORDER Today!
About ZUKIWORLD Online: We are an enthusiast web site dedicated to the promotion of the Suzuki Automobile as the best and most capable vehicle on the planet. We offer product reviews, Tech tips, DIY, Travel and Adventure, Forum, Technical information, Life Style, and so much more!

Re: rocker screws?
« Reply #7 on: November 19, 2009, 11:49:49 AM »
I found the same thing on mine. Half of them were loose, but half of them have been OVERTIGHTENED and wont budge with an impact driver. I've brocken two  phillips heads trying to loosn them and stripped out some of the screws. I need to replace a few rockers so will have to loosen those grub screws somehow.

If you are planning to use loctite and impact to hold those screws in, maybe you should use a hex screw or torx head or something that will easier to remove in the future.