Hello Guest
« previous next »
Pages: [1]   Go Down

redline 1.3

  • 13 Replies
  • 3280 Views

0 Members and 6 Guests are viewing this topic.

*

Offline lowrider

  • 57
  • 0
  • Gender: Male
  • this is how the wife wants me to do it up
redline 1.3
« on: August 09, 2008, 06:16:54 PM »
I'm wanting to put a tach in my 86 samuri but I can't find anything on what the redline is on my 1.3 engine.
Logged
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: redline 1.3
« Reply #1 on: August 09, 2008, 07:42:35 PM »
stock tach is 6500
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline lowrider

  • 57
  • 0
  • Gender: Male
  • this is how the wife wants me to do it up
Re: redline 1.3
« Reply #2 on: August 10, 2008, 09:16:50 AM »
Thanks for the help
Logged
*

Offline lowrider

  • 57
  • 0
  • Gender: Male
  • this is how the wife wants me to do it up
Re: redline 1.3
« Reply #3 on: August 12, 2008, 05:01:13 AM »
Got my tach in. Notice that my motor is hard to wind it out to redline I only get to 5000.is this normal.does anyones make it to redline?
Logged
*

Offline rascott

  • 669
  • 15
  • Gender: Male
  • tread lightly monkeywrench a little
Re: redline 1.3
« Reply #4 on: August 12, 2008, 05:30:43 AM »
i assumed "redline" was a theoretical rpm limit.
wind it up past that and things could scatter.
i will run |removethispart|@4000 rpm when climbing hills, slightly over sometimes when running the gears, but thats about it.
little motors have to be run up in order to keep up w/the big boys, but not because they like it.
just a thought.
mabe.
Logged
'89 kick w/little motor, still got pieces of jeff's pucks, stan's sticks into 4.24:1 tcase, 31x10.5x15's, rear lockrite, kick power steering, some radios(kj6esv), bmw seat, other changes just because. done on the cheap.
suzi the psychic gets me fishing.
*

Offline 86badboy

  • 15
  • 0
  • Gender: Male
  • believe it!
Re: redline 1.3
« Reply #5 on: August 12, 2008, 07:00:46 AM »
when im drivng on the street my engine never sees anything less than 4000, primarily because of my gearing though.
Logged
BUILT NOT BOUGHT

86 sami, spoa, RUF w/ML's, 5.14 t-case, rear lockright, 33x12.5 mud T's, rear disk brakes, custom bumpers, custom lighting....list goes on.....

Blake
*

Offline lowrider

  • 57
  • 0
  • Gender: Male
  • this is how the wife wants me to do it up
Re: redline 1.3
« Reply #6 on: August 12, 2008, 07:56:19 AM »
When you run down the road at what rpm do you shift at
Logged
*

Offline Amilla

  • 1076
  • 0
  • Gender: Male
  • Toyota running gear was made for a samurai!
Re: redline 1.3
« Reply #7 on: August 12, 2008, 09:28:01 AM »
3000 to 3500 is my shift point if I'm just cursing, but it can go up from there....
Gears and tires really wiped out my high speed....
but thats they way i like it ;D

Amilla
Logged
88 Samurai, Sprung Up, Geared Down, Locked,With Yotas.
*

Offline Jeremiah

  • 1880
  • 1
  • Gender: Male
  • Viva La ZUKIWORLD!
Re: redline 1.3
« Reply #8 on: August 12, 2008, 04:00:26 PM »
Quote from: lowrider on August 12, 2008, 07:56:19 AM
When you run down the road at what rpm do you shift at

It depends on my load & road conditions.
Logged
'96 4 door kick: 29" Pep-Boys M/T, 1.5" OME
'83 SJ410: 31" Toyo M/T, SPOA, 1.3L
'08 Yamaha FZ6
*

Offline 86badboy

  • 15
  • 0
  • Gender: Male
  • believe it!
Re: redline 1.3
« Reply #9 on: August 12, 2008, 05:42:53 PM »
normal conditions i shift at 3500 to 4000, if im toying off i hold it alot longer. i cruise at around 4300 in forth at 60 on the freeway.
Logged
BUILT NOT BOUGHT

86 sami, spoa, RUF w/ML's, 5.14 t-case, rear lockright, 33x12.5 mud T's, rear disk brakes, custom bumpers, custom lighting....list goes on.....

Blake
*

Offline lowrider

  • 57
  • 0
  • Gender: Male
  • this is how the wife wants me to do it up
Re: redline 1.3
« Reply #10 on: August 12, 2008, 06:23:36 PM »
Cool I'm running and shifting bout right then.now all I need to do is adjust my valves so that ticking noise it has will quit. My dad never had it done when he had it
Logged
*

Offline SafetyGuy

  • 41
  • 0
  • Gender: Male
Re: redline 1.3
« Reply #11 on: August 12, 2008, 07:40:49 PM »
When adjusting valves, it is sometimes good not to get rid of the tick completely. When you here ticking, you know the valves are not to tight. Over tightening can cause burnt valves. Remember, a little ticking doesn't hurt.
Logged
If you Can Not Do It Safely, It's Not Worth Doing!
*

Offline lowrider

  • 57
  • 0
  • Gender: Male
  • this is how the wife wants me to do it up
Re: redline 1.3
« Reply #12 on: August 13, 2008, 04:34:44 PM »
Ok didn't know that about this engine. Thanks
Logged
*

Offline Skyhiranger

  • 3734
  • 122
  • I don't buy, what I can build
Re: redline 1.3
« Reply #13 on: August 13, 2008, 06:45:44 PM »
Just adjust the valves to spec and don't worry whether they tick or not.  If they are adjusted correctly, they won't be too tight and burn valves.
Logged
Tracker and Sidekick parts for sale.....PM me with your wants/needs.
Pages: [1]   Go Up
« previous next »