Hello Guest

What gears to run

  • 13 Replies
  • 4079 Views

0 Members and 2 Guests are viewing this topic.

*

Offline paps133

  • 166
  • 1
  • Gender: Male
  • make your own road..
What gears to run
« on: January 10, 2005, 06:17:23 AM »
Ladies and Gentlemen, I’m in need or some help, so I figured what a better place to pick some peoples brain. ;D ;D

OK first thing I need to know is, I wanted to run 33 or 32 on my 1995 geo tracker, 2door 5 speed.  This is my  daily driver, I would like to be able to reach speeds of (70 mph or 115km) in 5th gear, without having to push my engine to 5,000RPM’S.  ;) ;)

I’ve been told 5.12 would be fine, but I’ve also been told 5.83. This is where I need help. What gears would I need in-order to run these tires, to keep my highway speeds? ??? ???

Another thing, I’ve also wanted top know, what are the stock gears (ring & pinion) in the older tracker 89 to 94. Could they be use for bigger tires on my 95 ??? ???

Any comments or suggestions are greatly appreciated

Thanks Pierre

*

Offline Bobzooki

  • 1754
  • 2
  • Gender: Male
  • Web Wheeler
Re: What gears to run
« Reply #1 on: January 10, 2005, 06:21:53 AM »
Older Track/Kicks had either 5.12's or higher (lower number) ratios.

I run 5.83's and 31 X 10.50's on my 95 2-door Kick, and it's just right on the highway - well, it DOES have trouble with hills a bit, but on reasonably flat highway, 65 MPH is not a problem.

If you're running bigger tires, you'l have somewhat more issues.

BTW, on my rig, the speedo is dead on with my gear/tire combination (Goodyear Wrangler MTR's)
Bob

Tahoe 24' Fish-N-Fun Tritoon
115 HP Mercury outboard

*

Offline DaddyDave

  • 204
  • 0
  • Gender: Male
  • Indeed
Re: What gears to run
« Reply #2 on: January 10, 2005, 06:33:16 AM »
I believe Sidekick/Trackers came with the following ratios.  Feel free to correct me if I am wrong

4.30:1
4.62:1
4.88:1
5.12:1
5.38:1
5.62:1

Kind of a wide range of options to guess from.
"The maximum effective range of an excuse is 0.0 meters."

*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Re: What gears to run
« Reply #3 on: January 10, 2005, 07:00:53 AM »
32-33's I would definately do 5.83's. If not you will end up never using 5th gear. With 5.83 and 33's I can run 70-75 all day except on the big hills.

Zig
Zukipilot
'92 Liberty Overland Sidekick

Re: What gears to run
« Reply #4 on: May 27, 2008, 10:11:58 AM »
Hi everybody,
While searching web about ring-pinion gears, i noticed this forum and some threads inside.
One of the useful thread (for me) was this. 
I'd like to run 30" tyres instead of 195/80R15 stock tyres outside diameter of 27,28" on my 3 door hard top  manual transmission 1,6lt 16v '98 Vitara JLX. I guess the stock ring-pinion set is 5,12:1 and it seems ok to use them with 30", right?
If i should have to lower the ratio i think i'd prefer 5,62:1 ratio. Does anyone know which Suzuki models use this ratio as stock?


*

Offline kingzoo

  • 461
  • 0
  • Gender: Male
  • I LOVE MY JLX SIDEKICK
Re: What gears to run
« Reply #5 on: May 27, 2008, 11:38:05 PM »
   5.83 seems to be the gear ratio of choice for tires that size.I don't know if you could find yhem in another vehicle,but Calmini sells them and I am sure others do as well.mabey Trail Tough,but not positive.
KING ZOO!!

Re: What gears to run
« Reply #6 on: May 28, 2008, 03:13:26 AM »
Thanks for your reply kingzoo,
I can find calmini 5,83:1 r&p set but i don't think that the exact ratio i'd need for 30" tyres is 5,83:1
5,62:1 will be better. At some posts that i've read, it is mentioned that 5,62:1 has been used as stock r&p ratio on early '90's 5 door models. I think a stock one will cost less beans  :)

*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: What gears to run
« Reply #7 on: May 28, 2008, 07:37:59 AM »
5.62s were stock only in early 89 model 1.3L Track/Kicks.  5.38s were stock in early 8 valve 4 door Track/Kicks. 
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed

*

Offline lostsamurai

  • 433
  • 0
  • Gender: Male
  • LOSTSAMURAI
Re: What gears to run
« Reply #8 on: May 28, 2008, 08:42:04 AM »
i would say for sure go lower than 5:12 i run 32"s and i cant pass joggers, my sollution is to divorce the case and install a samurai case with 4:1's or 6.5:1's that way ill get my high range reduction as well as low range unlike the trackick type plus the sami gear sets are cheaper
88' Zuk 16v efi full width dana 44 axles and 37"s,hybrid exo cage, comp cut rear -18", F&R fox air shocks , jegs poly seats, sk automatic trans, 6.5:1 t case, twinsticks, 100" wheelbase with a 79" wide.

*

Offline tipover

  • 422
  • 4
  • Gender: Male
Re: What gears to run
« Reply #9 on: May 28, 2008, 10:06:58 PM »
5.83's are not being made as I've been told for the kicks...
Wheeler-87 Samurai JX. 7" lift, 1.6 TBI, lockers hybrid rear, 33" Swampers, 6 to 1s in a billet housing.
RV Dingy-2003 2 door tracker
Tow-97 PSD F250 Crew SB Dana 60 conversion
87 samurai-spoa ZookEV electric conversion.
RV- 31' Monaco Mckenzie

*

Offline kingzoo

  • 461
  • 0
  • Gender: Male
  • I LOVE MY JLX SIDEKICK
Re: What gears to run
« Reply #10 on: May 29, 2008, 06:55:17 AM »
   Calmini says they have the 5.83's in stock.But that is also what they said about a friends 3" likt kit.It took 3 months.
KING ZOO!!

*

Offline MaD.72

  • 183
  • 0
  • Gender: Male
  • It's not what you buy, it's what you built!!!
Re: What gears to run
« Reply #11 on: May 29, 2008, 10:50:03 AM »
Here's...

89-98 Trackick gear ratio

89     2dr 1.3L carb 5speed man. 5.625
89-95 2dr 1,6L TBI 5speed man. 5.125
89-95 2dr 1,6L TBI 3speed auto. 4.625
91      4dr 1.6L TBI 3speed auto. 4.625
91      4dr 1.6L TBI 5speed man. 5.375
92-98 4dr 1.6L MPFI 5speed man. 5.125
92-98 4dr 1.6L MPFI 3speed auto. 4.30
92-98 4dr 1.6L MPFI 4speed auto. 5.125
94-98 2dr 1.6L MPFI 5speed man. 5.125
94-98 2dr 1.6L MPFI 3speed auto. 4.30
94-98 2dr 1.6L MPFI 4speed auto. 5.125
96-98 X90 1.6L MPFI auto or man. 4.625

4.625 gears have an 8/37 tooth count
4.30 gears have an 10/43 tooth count
5.125 gears have an 8/41 tooth count
5.375 gears have an 8/43 tooth count
5.625 gears have an 8/45 tooth count

Re: What gears to run
« Reply #12 on: May 29, 2008, 11:41:07 AM »
Thanks MaD.72,
I got the idea for which model that i have to chase after;
89     2dr 1.3L carb 5speed man. 5.625
But i don't think that i could find, because i haven't even heard about these 1,3lt models here in Turkiye.

*

Offline tipover

  • 422
  • 4
  • Gender: Male
Re: What gears to run
« Reply #13 on: May 29, 2008, 12:02:40 PM »
   Calmini says they have the 5.83's in stock.But that is also what they said about a friends 3" likt kit.It took 3 months.

just called calmini 5 mins the 5.83 rear for sidekick have been discontinued and their is no expectation that they we be made again.
Wheeler-87 Samurai JX. 7" lift, 1.6 TBI, lockers hybrid rear, 33" Swampers, 6 to 1s in a billet housing.
RV Dingy-2003 2 door tracker
Tow-97 PSD F250 Crew SB Dana 60 conversion
87 samurai-spoa ZookEV electric conversion.
RV- 31' Monaco Mckenzie