Hello Guest
« previous next »
Pages: [1]   Go Down

Replacing head gasket... reuse the old head bolts?

  • 4 Replies
  • 2396 Views

0 Members and 2 Guests are viewing this topic.

*

MiniFJ

Replacing head gasket... reuse the old head bolts?
« on: February 01, 2008, 02:30:03 PM »
I'm replacing the head on my samurai and one thing that has come up is if I need to replace the head bolts or not. If I DO need to replace them where is the best place to get them? Any info is helpful. Thanks
Logged
*

phloop

Re: Replacing head gasket... reuse the old head bolts?
« Reply #1 on: February 01, 2008, 02:52:24 PM »
You should replace them as the bolts are torque to yield bolts. I did reuse the old bolts on my old Sami when I did a head job on it and I had no problems but I did not know they were not reusable. I also checked the torque a couple of times.
Logged
*

Offline SnoFalls

  • 1358
  • 3
  • Gender: Male
Re: Replacing head gasket... reuse the old head bolts?
« Reply #2 on: February 01, 2008, 03:58:37 PM »
Quote from: phloop on February 01, 2008, 02:52:24 PM
You should replace them as the bolts are torque to yield bolts....
Is this true?
(I've yet to see a definitive resource)

Also, what about 1.6l engines (either 8v or 16v) ...

Logged
I don't suffer from insanity, I enjoy it.

Buy-it, Build-it, Beat-it, Part-it
*

Offline TrakJD

  • 232
  • 1
Re: Replacing head gasket... reuse the old head bolts?
« Reply #3 on: February 01, 2008, 09:03:23 PM »
Ive heard that we are "supposed"to replace the bolts.  But Ive done a few motor rebuildings and I ve reused the bolts with success.  I always check the bolts for any strips..  If there's none, then ill use it.  If there is, Replace it.
Logged
*

Offline idaholwb

  • 772
  • 2
  • Gender: Male
  • And that's the way the metal crumpled!
Re: Replacing head gasket... reuse the old head bolts?
« Reply #4 on: February 01, 2008, 10:21:44 PM »
 The 16V engines are the only torque-to-yield bolts. The 8V engines use standard bolts. There is very little taper to them if you look at them closely. Torque-to-yield bolts have a noticeable taper to them.
Logged
97 Sport
265/70-16s
2" lift
2.0 swap
I know...Pretty boring... FOR NOW...
Pages: [1]   Go Up
« previous next »