Hello Guest
« previous next »
Pages: [1]   Go Down

Carb to FI

  • 5 Replies
  • 1145 Views

0 Members and 3 Guests are viewing this topic.

*

Shizamaaur

Carb to FI
« on: January 31, 2008, 03:34:20 PM »
Hello everyone. Got my hands on a 1.6 EFI motor for cheap and im wanting to swap my 1.3L Carb. in my 87 sammy, Can I use my old harness? if not are there any good guides for wiring the new harness up? any hints? thanks everyone!

Also are there any good cams to put in the new 1.6 that would give me more power? and how easy would it be to convert the power steering from the donor to put on my sammy? thanks
« Last Edit: January 31, 2008, 04:14:18 PM by Shizamaaur »
Logged
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: Carb to FI
« Reply #1 on: January 31, 2008, 08:22:57 PM »
i had trail tough do mine for me just plug and play.
i'm runnig the calmini adapter for the sidekick P/S
just bolted it right on with the adapter
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Shizamaaur

Re: Carb to FI
« Reply #2 on: February 01, 2008, 06:45:18 AM »
Do you just need to send the wiring harness? also how long did it take for you to get your harness back?
Logged
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: Carb to FI
« Reply #3 on: February 01, 2008, 06:51:33 AM »
you need to send the one for the FI.  got mine back in ten days.  every connection was labeled and easy to install .  just call Brent and he'll tell you what to send .
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Shizamaaur

Re: Carb to FI
« Reply #4 on: February 01, 2008, 06:56:03 AM »
I appreciate the help pal. ;D As for the cam any ideas?
Logged
*

Shizamaaur

Re: Carb to FI
« Reply #5 on: February 01, 2008, 10:24:21 AM »
bump
Logged
Pages: [1]   Go Up
« previous next »