Hello Guest
« previous next »
Pages: [1]   Go Down

RPM question

  • 3 Replies
  • 1129 Views

0 Members and 2 Guests are viewing this topic.

*

Riddick

RPM question
« on: November 28, 2007, 11:04:54 PM »
I noticed today while driving my tracker that while in 5th gear and doing 55MPH my RPM's were in the 3000 range and 65MPH was 3500, is this correct? Seems high however shifting is great, no noise or anything to alert me.
Logged
*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: RPM question
« Reply #1 on: November 29, 2007, 03:44:03 AM »
That is correct.  Trackicks are geared lower to make up for the small amount of horsepower.
Logged
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: RPM question
« Reply #2 on: November 29, 2007, 03:47:21 AM »
Mine's not happy till it's revvin' at 4 grand at 70mph, right in the power band .
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline JoeCool

  • 164
  • 0
  • Gender: Male
  • Carpe Noctum!
    • cardomain
Re: RPM question
« Reply #3 on: December 02, 2007, 11:03:09 PM »
Mine was happiest, fuel consumption, noise, ride at about 55-60. It does have a sweet spot at 70 but only 'cus pre turbo it was significantly more work for the motor to pull any faster than that.
Logged
5psi turbo '90 2dr 5spd 8v Tracker, Lt235s, 1" spacers, Rocker Rails, Warn Hubs, Custom half door,--GONE!
New, Sammi Tintop
Pages: [1]   Go Up
« previous next »