Hello Guest
« previous next »
Pages: [1]   Go Down

HELP!! must lower!

  • 8 Replies
  • 1739 Views

0 Members and 1 Guest are viewing this topic.

*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
HELP!! must lower!
« on: September 09, 2007, 08:58:08 PM »
friend is using a tracker frame for a kit car, needs to lower it.  I  heard of firebird front struts, anyone know anything else?  wont need a lot od suspension travel, the strut tower will be cut  and lowered, just need a short strut
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline HotRod

  • *
  • 4334
  • 2
  • Gender: Male
  • 95 Tracker
    • cardomain.
Re: HELP!! must lower!
« Reply #1 on: September 09, 2007, 10:07:03 PM »
Don't have a clue on how to lower one
But pics of the kit car project would be interesting.
Logged
95 2dr Geo Tracker with Calmini 6"inch combo lift, 32'inch BFGs M/Tlocked and loaded--D.D is my 06 Racy RED Aerio SX AWD
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: HELP!! must lower!
« Reply #2 on: September 10, 2007, 05:25:09 AM »
If you don't need so much travel can't you just shorten the springs and add limiting straps to stop the front struts over extending (and letting the springs fall out!).
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: HELP!! must lower!
« Reply #3 on: September 10, 2007, 07:11:08 PM »
the strut towers hit the hood, need shorter struts so the strut tower can be lowered for clearance
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline Mikerpm4x4

  • 2875
  • 12
  • Gender: Male
  • Redline... all the time!
    • www.rpm4x4.com
Re: HELP!! must lower!
« Reply #4 on: September 10, 2007, 07:55:39 PM »
Quote from: bandit86 on September 10, 2007, 07:11:08 PM
the strut towers hit the hood, need shorter struts so the strut tower can be lowered for clearance

How far does it need to be cut?
Logged
If your not living life to the fullest then your not living at all.

You wont really know if your wrong till your upsidedown
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: HELP!! must lower!
« Reply #5 on: September 11, 2007, 06:06:55 PM »
4 inches shorter would be nice, take what we can get at this point
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: HELP!! must lower!
« Reply #6 on: September 11, 2007, 07:10:08 PM »
If you want to do the work you could just eliminate the struts all together.  Do a setup similar to Mike Haggens front end.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: HELP!! must lower!
« Reply #7 on: September 12, 2007, 10:10:43 AM »
what did he do??
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: HELP!! must lower!
« Reply #8 on: September 12, 2007, 06:30:30 PM »
http://www.zukiworld.com/month_050106/feature_hagen-newfrontend.htm

Redesigned the front end and eliminated the struts.  Then you could put some mini-truck shocks on or something.
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
Pages: [1]   Go Up
« previous next »